Setup guide
Table Of Contents
- Front Matter
- Contents
- Introduction
- Chap 1-Setting Up Your System
- Chap 2-Running the SETUP Program
- Starting the SETUP Program
- Selecting Options
- Setting the Date and Time
- Setting the Processor Speed Options
- Setting the Fast Boot Option
- Setting the System and Video BIOS Options
- Setting the Keyboard Options
- Installed Equipment
- Setting the Built-in Paralllel and Serial Port Options
- Setting the Speaker
- Setting the Disk Drive Controllers
- Setting the Password Options
- Setting the Diskette Drive Type(s)
- Setting the Hard Disk Drive(s)
- Setting the Non-cache Areas
- Setting the Cache Test and Use Control Options
- Saving Your Settings and Exiting SETUP
- Post-SETUP Procedures
- Appendix A-Using Memory
- Index
- Diagrams
You see the first screen of SETUP information:
Note
If you have installed optional equipment or if there is a
problem with your configuration, you see this message:
Invalid Setup detected! Sat Default Values (Y/N)?
Press
m
to set the default values (determined by your
computer automatically).
There are several screens of SETUP options. A box in the lower
left corner continuously displays the
current date and time. The
help lines at the top and bottom of the screen list some of the
keys you can press to perform various SETUP operations.
Running the SETUP Program
2-3