User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-USING YOUR CHAPTER
- Turning On the Computer
- Turning Off the Computer
- Using Disks and Disk Drives
- Special Keys on the Keyboard
- Stopping a Command or Program
- Resetting the Computer
- Using a Password
- Using Your Computer a Network Server
- Changing the Processor Speed
- Preparing the Hard Disk for Moving
- Using AUTOEXEC. BAT and Other Batch Files
- CHAP 2-INSTALLING AND REMOVING OPTIONS
- How to Use This Chapter
- Removing the Cover
- Changing the Jumper Settings
- Memory Modules (SIMMs)
- Installing an Option
- Removing an Option Card
- Removing the Option Card Connector Board
- Replacing the Option Card Connector Board
- Installing a New Processor Chip
- Using the Alternate VGA
- Replacing the Cover
- Post-installation Procedures
- CHAP 3-INSTALLING AND REMOVING DRIVES
- CHAP 4-RUNNING SYSTEM DIAGNOSTICS
- CHAP 5-FORMATTING A HARD DISK
- CHAP 6-TROUBLESHOOTING
- APPENDIX A-SPECIFICATIONS
- GLOSSARY
- INDEX
Other jumper settings
Jumper
number
J9”’
JlO
Jll
J12”’
J13
J14
J15
Jumper
setting
A’
B
A
B
A”
B
A
B’
A
B”
A’
B
I
c
Function
Enables the built-in mouse connector
Disables the built-in mouse connector so you can
use a mouse connected to a port on an option
card in your computer
Enables the built-in VGA display adapter
Disables the built-in
VGAdisplay
adapter so you
can use a display adapter on an option card in
your computer as your primary adapter
A color monitor is installed
A monochrome monitor is installed
Enables an external mouse or other pointing device
on an option card
Disables the external mouse or pointing device
Disables the password
Enables the password
Reserved
Reserved
l Factory setting
l
*
If you want to use a mouse connected to the port on an option card, you
need to disable J9 and enable J12. If you are using another type of
pointing device on the option card port, such as a joy stick, you can
enable both jumpers.
Installing and Removing Options 2-7