User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-USING YOUR CHAPTER
- Turning On the Computer
- Turning Off the Computer
- Using Disks and Disk Drives
- Special Keys on the Keyboard
- Stopping a Command or Program
- Resetting the Computer
- Using a Password
- Using Your Computer a Network Server
- Changing the Processor Speed
- Preparing the Hard Disk for Moving
- Using AUTOEXEC. BAT and Other Batch Files
- CHAP 2-INSTALLING AND REMOVING OPTIONS
- How to Use This Chapter
- Removing the Cover
- Changing the Jumper Settings
- Memory Modules (SIMMs)
- Installing an Option
- Removing an Option Card
- Removing the Option Card Connector Board
- Replacing the Option Card Connector Board
- Installing a New Processor Chip
- Using the Alternate VGA
- Replacing the Cover
- Post-installation Procedures
- CHAP 3-INSTALLING AND REMOVING DRIVES
- CHAP 4-RUNNING SYSTEM DIAGNOSTICS
- CHAP 5-FORMATTING A HARD DISK
- CHAP 6-TROUBLESHOOTING
- APPENDIX A-SPECIFICATIONS
- GLOSSARY
- INDEX
High-density
A type of diskette format that allows you to store more data
than on single- or double-density diskettes. A 5.25-inch,
high-density diskette can store 1.2MB of data. A 3.5-inch,
high-density diskette can store
1.44MB
of data.
IDE
Integrated Drive Electronics. A type of hard disk drive interface
in which the controller is located on the drive, instead of on a
controller card. Your computer includes an interface on the
main system board for up to two IDE hard disk drives.
Input/output (I/O) port
See Port.
lnterface
A physical or software connection used to transmit data
between equipment or programs so they can work with each
other.
Jumper
A small moveable plug that connects two pins on a device’s
circuit board. Jumpers can be used to alter the operation of a
particular function.
Key disk
A diskette containing a copy-protected program that must
remain in a diskette drive while you use the program. See also
Copy-protected program.
Glossary 11