User`s guide

How to Use This Manual
This manual contains the information you need to get the best
results from your computer. You don’t have to read everything
in this book; check the following summary.
Chapter 1 covers general operating procedures, such as turning
the computer on and off, using disks and disk drives, entering a
password, and changing the processor speed.
Chapter 2 describes how to remove and replace the computer’s
cover, change jumper settings, and install optional equipment
such as option cards and memory modules.
Chapter 3 explains how to install and remove disk drives,
Chapter 4 provides instructions for running system diagnostics.
Chapter 5 gives the procedure for formatting a hard disk.
Chapter 6 contains troubleshooting tips.
Appendix A lists the specifications of your computer.
At the end of this manual, you’ll find a Glossary and an Index.
Note
Please see the Setup Guide for instructions on setting up your
system and running the SETUP program.
4 Introduction