User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-USING YOUR CHAPTER
- Turning On the Computer
- Turning Off the Computer
- Using Disks and Disk Drives
- Special Keys on the Keyboard
- Stopping a Command or Program
- Resetting the Computer
- Using a Password
- Using Your Computer a Network Server
- Changing the Processor Speed
- Preparing the Hard Disk for Moving
- Using AUTOEXEC. BAT and Other Batch Files
- CHAP 2-INSTALLING AND REMOVING OPTIONS
- How to Use This Chapter
- Removing the Cover
- Changing the Jumper Settings
- Memory Modules (SIMMs)
- Installing an Option
- Removing an Option Card
- Removing the Option Card Connector Board
- Replacing the Option Card Connector Board
- Installing a New Processor Chip
- Using the Alternate VGA
- Replacing the Cover
- Post-installation Procedures
- CHAP 3-INSTALLING AND REMOVING DRIVES
- CHAP 4-RUNNING SYSTEM DIAGNOSTICS
- CHAP 5-FORMATTING A HARD DISK
- CHAP 6-TROUBLESHOOTING
- APPENDIX A-SPECIFICATIONS
- GLOSSARY
- INDEX
System Memory Map
FFFFFFFFh
FFFFOOOOh
Power up boot ROM
Not available
201 OOOOOh or
202000COh
Wingine video RAM: 1 MB
20000OOOh
080CDOOOh
Not available
Extended memory
128MB
(maximum)
001 OOOOOh
1MB
System BIOS ROM shadow RAM: 64KB
OOOFOOOOh
Available for shadowing
OOOE8000h
VGA BIOS ROM shadow RAM: 32KB l
OOOEOOOOh
Available for shadowing
OOOC8000h
VGA BIOS ROM shadow RAM:32KB’
--I
OOOCOOOOh
VGA color text
4
OOOB8000h
VGA monochrome text
OOOBOOOOh
VGA graphics: 64KB
OOOAOOOOh
640KB
Conventional system memory: 640KB
I
COOOOOOOh
*
Only one of these address blocks is used to shadow the VGA BIOS ROM.
The default starting address is 000C0000h; address
OOOEOOOOh
is selectable
using SETUP.
A-8 Specifications