User`s guide
Table Of Contents
- FRONT MATTER
- CONTENTS
- INTRODUCTION
- CHAP 1-USING YOUR CHAPTER
- Turning On the Computer
- Turning Off the Computer
- Using Disks and Disk Drives
- Special Keys on the Keyboard
- Stopping a Command or Program
- Resetting the Computer
- Using a Password
- Using Your Computer a Network Server
- Changing the Processor Speed
- Preparing the Hard Disk for Moving
- Using AUTOEXEC. BAT and Other Batch Files
- CHAP 2-INSTALLING AND REMOVING OPTIONS
- How to Use This Chapter
- Removing the Cover
- Changing the Jumper Settings
- Memory Modules (SIMMs)
- Installing an Option
- Removing an Option Card
- Removing the Option Card Connector Board
- Replacing the Option Card Connector Board
- Installing a New Processor Chip
- Using the Alternate VGA
- Replacing the Cover
- Post-installation Procedures
- CHAP 3-INSTALLING AND REMOVING DRIVES
- CHAP 4-RUNNING SYSTEM DIAGNOSTICS
- CHAP 5-FORMATTING A HARD DISK
- CHAP 6-TROUBLESHOOTING
- APPENDIX A-SPECIFICATIONS
- GLOSSARY
- INDEX
5.
If the diskette drive is making loud or unusual noises, do not
attempt any further examination of it. Contact your
Authorized Epson Servicer.
Hard Disk Problems
If you have a problem with a hard disk, it could be the result of
improper installation, incomplete disk preparation, or
corrupted data. Consult one of the following sections,
depending on the problem you are having:
Cl
Installing the drive
LI
Preparing the drive for use
tl
Accessing data on the drive.
For example, if you could use the data on your disk in the past
but suddenly cannot, see “Accessing Data on the Drive.”
Caution
If your hard disk has data on it, always be sure to back up
your data before reformatting or repartitioning the drive.
6-16 Troubleshooting