Operation Manual

43
Advanced Operations
When a computer image is not projected
You can switch the output destination from the computer by holding down
and pressing (the key is usually labeled or ).
s Computer documentation
After switching, wait a few seconds for projection to start.
Depending on the computer, each time the key to change the output is
pressed, the display status may also change as follows.
Functions available when in external video or
computer mode
The following remote control buttons are available when in external video or
computer mode.
v Color Mode sp. 19 v Wide/Normal sp. 61
v Sleep sp. 35 v Sound Mode sp. 46
v DVD level sp. 47 v Break sp. 19
v Image On/Off sp. 23 v Adjusting high pitched tones sp. 46
v Mute sp. 19 v Volume sp. 15
v Information sp. 56 v Picture Quality sp. 54
Examples of Switching Output
NEC IBM
Panasonic SONY
SOTEC DELL
HP FUJITSU
TOSHIBA
Macintosh
Set mirroring or display detection. Depending on your OS you
can set them by pressing .
Computer only Screen only Both