Operation Manual
Table Of Contents
- About the Manuals and Notations Used
- Checking the Components
- Table of Contents
- Features of the Projector
- Part Names and Functions
- Appearance
- Setting up
- Connecting Image Sources
- Preparing the Remote Control
- Projecting Images
- Adjusting the Projection Screen
- Basic Image Quality Adjustments
- Advanced Colour Adjustments
- Examining Image Quality Further
- Viewing Images at a Preset Image Quality(Memory Function)
- Configuration Menu Functions
- Problem Solving
- Maintenance
- Optional Accessories / Consumables
- List of Supported Monitor Displays
- Specifications
- Glossary
- Index
52
Specifications
■ Angle of tilt
If you set the projector higher than 15º, it could damage the projector and cause an accident.
■ RS-232C cable layout
Safety
EU
The Low Voltage Directive
(73/23/EEC)
IEC/EN60950-1
EMC
EU
The EMC Directive
(89/336/EEC)
EN55022 Class B
EN55024
IEC/EN61000-3-2
IEC/EN61000-3-3
This product is also designed for IT power distribution system with phase to phase voltage 230V.
• Connector shape : D-Sub 9-pin (male)
• Projector input connector : RS-232C
<At projector>
(PC serial cable)
<At computer>
Signal Function
GND 5 5 GND
GND Signal wire earth
RD 2 3 TD
TD Transmit data
TD 3 2 RD
RD Receive data
DTR 4 6 DSR
DSR Data set ready
DSR 6 4 DTR
DTR Data terminal ready
<At projector>
<At computer>