Operation Manual
Table Of Contents
- About the Manuals and Notations Used
- Checking the Components
- Table of Contents
- Features of the Projector
- Part Names and Functions
- Appearance
- Setting up
- Connecting Image Sources
- Preparing the Remote Control
- Projecting Images
- Adjusting the Projection Screen
- Basic Image Quality Adjustments
- Advanced Colour Adjustments
- Examining Image Quality Further
- Viewing Images at a Preset Image Quality(Memory Function)
- Configuration Menu Functions
- Problem Solving
- Maintenance
- Optional Accessories / Consumables
- List of Supported Monitor Displays
- Specifications
- Glossary
- Index
47
Maintenance
Appendix
Remove the old air
filter.
Insert the new air filter. Install the air filter cover.
Loosen the lamp fixing
screws.
Remove the old lamp.
Pull out straight.
Insert the new lamp.
Make sure that it faces
the correct way.
Install the lamp and the lamp cover securely. The lamp will not turn on if
the lamp or the lamp cover is not installed correctly.
This product includes a lamp component that contains mercury (Hg).
Please consult your local regulations regarding disposal or recycling. Do
not dispose of it with normal waste.
Select "Reset Lamp
Hours" from the "Reset"
menu.
Select "Yes" and then
press .