Operation Manual
Table Of Contents
- About the Manuals and Notations Used
- Checking the Components
- Table of Contents
- Features of the Projector
- Part Names and Functions
- Appearance
- Setting up
- Connecting Image Sources
- Preparing the Remote Control
- Projecting Images
- Adjusting the Projection Screen
- Basic Image Quality Adjustments
- Advanced Colour Adjustments
- Examining Image Quality Further
- Viewing Images at a Preset Image Quality(Memory Function)
- Configuration Menu Functions
- Problem Solving
- Maintenance
- Optional Accessories / Consumables
- List of Supported Monitor Displays
- Specifications
- Glossary
- Index
35
Configuration Menu Functions
Configuration Menu
"Memory" menu
"Reset" menu
Adjustment values for the "Settings" menu functions are returned to their default settings, except for the
"High Altitude Mode", "Projection", "Component", "D/SCART", and "Language".
This retrieves settings previously saved using "Save Memory". p.25
This cannot be selected when nothing is saved at "Save Memory".
This can be used to save "Image" menu settings. p.25
This is used to erase unwanted saved memory. p.25
This resets all configuration menu settings to their default settings. "Component", "D/SCART" and
"Language" in the "Settings" menu, and the settings of "Memory" menu are not returned to their default
even if "Reset All" is executed.
This resets (erases) all settings that have been made using the "Save Memory".
Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace
the lamp.
Reset
Load Memory
Save Memory
Erase Memory
Reset All
Reset Memory
Reset Lamp Hours