Operation Manual

Configuration Menu Functions

Configuration Menu

"Setting" menu

This can be used to save the current configuration menu settings. p.22

This retrieves settings stored in the memory. p.22

This sets automatic adjustment to on or off in order to set whether the projector automatically adjusts

images to their optimum condition when the input signal is changed. The three automatically adjusted

items are "Tracking

", "Position" and "Sync."

This returns all settings in the "Image" menu to their default settings, except for the settings that have

been saved using the "Save Memory" command. The "Save Memory" settings can be reset using the

"Memory Reset" menu. p.31

Use , , or to move the display position for images.

(This can only be set when composite video or S-Video signals are being input or when 525i/625i

signals from component video

or RGB video are being input.)

• OFF :Conversion of interlaced (i) signals to progressive (p) signals is carried out for each field in the

screen.

This is ideal for using when viewing images with a large amount of movement.

• ON :Interlaced (i) signals are converted into progressive (p) signals. This is ideal for using when

viewing still images.

Selects the aspect mode. p.18

*1 The setting values are stored separately for each image source and signal type.

Only displayed for RGB-video/Computer input

Save Memory

Load Memory *

Auto Setup *

Reset

Screen

Position *

Progressive *

Aspect *