Operation Manual

25
Configuration Menu Functions
Configuration Menu
Resolution
Sleep Mode
p.27
p.28
p.29
p.30
p.30
p.30
p.30
p.31
p.31
p.31
This can only be set when 525i or 525p
component video signals are being input or when
NTSC signals from composite video or S-Video
are being input.
This can only be set when component video
signals or RGB video signals are being input.
"Setting" menu
Screen
Progressive
Aspect
Position
Zoom Caption
Output Scaling
Keystone
Operation
User's Logo
Display
ON, OFF
Auto, Normal, Squeeze, Zoom
ON, OFF
ON, OFF
ON, OFF
Normal,
Larger
Projection
Front, Front/Ceiling
Rear, Rear/Ceiling
Setup Level
Direct Power ON
0% ,7.5%
Vertical Size
Zoom Position
OFF , 5min. ,10min. , 30min.
Sleep Mode
Child Lock
High Altitude Mode
Menu Color
Message
Background Color
Startup Screen
Input Signal
Volume
Language
Reset
Yes, No
Color 1, Color 2,
ON, OFF
ON, OFF
Black, Blue, Logo
Video Signal
Auto, NTSC, NTSC4.43, PAL,
M-PAL, N-PAL, PAL60, SECAM
"Info" menu
Lamp Hours
Time from 0H to 10H will be displayed as 0H.
From 10H onwards, the display will be in units of 1H.
Input Signal
Source
Resolution
Video Signal
Refresh Rate
Sync Info
The "Info" menu is only used to display the projector status.
Only displayed for composite video/S-Video input
Only displayed for component video/RGB-video/Computer input
Only displayed for RGB-video/Computer input
"Reset" menu
Reset All
Lamp - Hours Reset
Memory Reset
Yes, No
Yes, No
Yes, No
Input A
Component, RGB-Video
The message text will be displayed in yellow when it is
time to replace the lamp.
p.29