Specifications

Troubleshooting

f Cannot connect in "Advanced Connection Mode" or wired LAN connection

f The Slide show cannot be displayed on the desired display when using the multi-screen display.

f Applications are no longer displayed from the computer's screen when using the multi-screen display.

Is the network cable connected correctly?

Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected

properly.

Check Remedy

Is the SSID setting different? Set the computer, the access point, and the projector to the same SSID.

s User’s Guide "Network Menu (EMP-1825 Only)"

Is the same WEP key set? When selecting WEP from "Security", set the access point, the computer, and the projector to the same WEP

key. s User’s Guide "Network Menu (EMP-1825 Only)"

Are the connection denial functions, such as MAC

addressg restrictions and port restrictions, set

correctly at the access point?

Set the projector to allow connections from the access point.

Are the IP address, the subnet mask, and the gateway

address for the access point and the projector set

correctly?

When not using a DHCP, adjust each setting. s User’s Guide "Network Menu (EMP-1825 Only)"

Are the access point and the projector's subnet

different?

Select "Manual search" from EMP NS Connection, specify the IP address, and connect.

s p.35

Check Remedy

Are you using PowerPoint 2002 or an earlier version?

To set and use two or more virtual displaysg, use PowerPoint 2003, or limit the number of virtual displays to

one before displaying the Slide show.

Check Remedy

Is another application running on the virtual displayg?

When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this

case, set "EPSON Virtual Display" to "Off" at "Screen properties".

Check Remedy

For Wired LAN

For Windows