Specifications

Connecting to a Projector on a Network and Projecting
16
Presentation Mode
Each time this is clicked, Presentation mode switches between enabled/
disabled. s p.20
Projector control
While the projector is connected to the network, the projector's "A/V
Mute", "Switch PC source" and "Switch video source" functions can be
controlled from both the remote control and the projector's operating
panel.
Click to display the following toolbar.
A/V Mute
The same function as the [A/V Mute] button on the remote
control.
s User’s Guide "Remote Control"
Switch PC source
Click to change the input source in the order of Computer1 input
port - Computer2 input port - BNC input port - EasyMP.
Switch video source
Click to change the input source in the order of S-video input
port - Video1 input port - Video2 input port - HDMI input port.
The S-video input port does not switch if the cable is not
connected.
A/V Mute Switch PC source
Switch video source
Screen Preview
Displays the multi-screen preview screen.
Clicking causes a preview of the display with the settings you have
made to appear. Clicking each display causes each preview window to be
enlarged to full-screen.
Set options
Transmission performance during the transfer of computer images can
be adjusted. s p.42
Movie Sending Mode
Used to immediately play back a movie file. s p.21
Disconnect
Disconnects the connection to the projector.
Signal intensity
This is displayed when the connection is made in the "Quick Connection
Mode". As the signal strength increases, so does the number of lit
indicators.