EMP Monitor Operating Guide
Meanings of symbols used CAUTION TIP Indicates something that may cause injury or damage to the projector. Indicates information that is related to a topic or which may be useful to know. Indicates a page where a related topic or more a detailed explanation is provided. [ (Name) ] Indicates the name of a projector port or a computer menu or item name.
Contents 2 Meanings of symbols used 1 Operating Environment 3 Compatible computers ............................................................ 3 Before starting operations ....................................................... 3 Registering projectors for monitoring 4 Registration using automatic detection ................................... 5 Registration using IP address (Manual registration) ............... 6 Editing the manually-registered projector list ..........................
Operating Environment 3 You can display status information on a computer screen for multiple projectors that are connected to a network and also carry out batch operations on all projectors such as turning the power on and off and changing the image source. A maximum of 64 projectors can be monitored and controlled by batch operations. Compatible computers * Macintosh computers cannot be used.
Registering projectors for monitoring 4 This operation is carried out when starting EMP Monitor for the first time after it has been installed and when you would like to add projectors. Once a projector has been registered, the status for the projector will be displayed automatically each time EMP Monitor is started from that point onwards. PROCEDURE 1 Click [Start] - [Programs] (or [All Programs]) - [EPSON Projector] - [EMP Monitor] in that order to start EMP Monitor. 2 Click [Register projector].
5 Registering projectors for monitoring Registration using automatic detection PROCEDURE 1 Click [Auto detect] in the [Register projector] dialogue box. 2 Select the projector(s) to be registered, and then click [Add]. You can select several projectors at the same time. If a projector does not appear in the list, use "Registration using IP address (Manual registration)". p.
6 Registering projectors for monitoring Registration using IP address (Manual registration) PROCEDURE Editing the manually-registered projector list Use the following procedure to change the projector name or IP address for projectors that have been registered manually. PROCEDURE 1 Click [Manual registration] in the [Register projector] dialogue box. 2 Enter the IP address for the projector to be registered in the [IP address] box, and then click [Confirm].
Main EMP Monitor window The main window shows the status information for each projector. To carry our operations for projectors, select the projectors from the projector list and then click the buttons. Buttons 7 Button functions The power can be turned on or off and the image source can be changed for the projectors that are selected from the projector list. The same operations can also be carried out using the commands in the [Tools] menu.
8 Main EMP Monitor window Understanding the projector list The projector list uses the following icons to show the projector statuses. Status:Shows the projector status. Power on and normal status Power off and normal status Power on and abnormal status Power off and abnormal status Network error (such as not connected to network or power cord not connected) Name:Shows the projector name. Image source:Shows the selected image source.
9 Main EMP Monitor window Displaying detailed information You can check detailed information on the status of individual projectors that are connected. PROCEDURE 1 Select the projector to be checked in the main window. 2 Click [View details]. Click to display details. The details that are displayed may vary slightly depending on the projector connected. Detailed status information will be displayed in the [Details] dialogue box.
A projector cannot be monitored or controlled using EMP Monitor Cause Remedy Is the projector connected to Connect the network cable correctly. the network correctly? "Network Cable Connections" in the accessory User's Guide Has the projector been set Check the settings for the "Network" up correctly for connection configuration menu command. to the network? Accessory User's Guide Has EMP Monitor been Uninstall EMP Monitor and then re-install installed to the computer it.
11 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
