Projector User Manual

80 - Troubleshooting
Point
· Refer to the section on [When the Indicators Provide No Help] on the following page if the
Indicators appear normal but the projected image is defective.
· Contact your dealer if an Indicator status not covered by the above table is apparent.
Blinking in
Orange
High-temperature
cooling in progress
(This is not an error, but the projector will
automatically cease operating if the tempera-
ture increases any further.)
· Use the projector within the permissible
temperature range of between 5 degrees
Celsius and 40 degrees Celsius.
· Install the projector in a well-ventilated place
and ensure that the ventilation inlet and
outlet are not blocked.
22
· Clean the Air Filter. 89
Extinguished (Not an error)
The power has not been switched on or nor-
mal projection is in progress.
Indicator Status Cause Recovery and Status Reference
Page