User`s guide

8
If No Connected Projectors Appear
EasyMP Operation Guide
The IP address will appear in the "Projector" list and
an icon will appear beside it to show that searching is
in progress. If the projector is found, the projector
name will be displayed in the "Projector" list. If you
would like to add another projector, repeat step 6.
Projectors that have been registered are added to the "Projector" list.
Click the name of the projector to be connected,
select the check box for that projector, and then click
the "Connect" button.
The computer and projector will be connected via the network, and
the computer screen will be projected by the projector.
7
The connection statuses are
indicated by the icon colour
and shape as follows.
:Not connected
:Connected to other
computer
:Currently being searched
for
:Specified projector could
not be found
•
Up to a maximum of 16 projectors can be registered. If you try to
add 17 or more projectors, the existing projectors will be deleted
starting from the first projector that was registered. The maximum
number of projectors that can be connected at the same time is four.
•
When you exit EMP NS Connection and start it the next time, the
projectors that were added to the "Projector" list will be deleted. If
you would like the same projectors to appear in the list each time
you start EMP NS Connection, create a group and register the
required projectors as part of that group. sp.9
TIP
8
•
If you select a projector that is already connecting to another
computer, the other computer is automatically disconnected and
your computer's image will be projected.
•
If you select more than one projector, you can project images from
one computer to several projectors. Up to a maximum of four
projectors can be used to project images from a single computer.
•
After you have clicked the "Connect" button, you cannot connect
any more projectors.
TIP
Downloaded From projector-manual.com Epson Manuals