User`s guide

6
EasyMP Operation Guide
If No Connected Projectors Appear
If no connected projectors appear in the projector selection window of EMP
NS Connection, check the following points.
• If using a wireless LAN, are the projectors set up where signals
cannot reach or where signals are weak?
• Has the connection mode been set correctly?
• Is the subnet correct?
If a projector is connected to a network that has a different subnet, you can
connect the projector using IP connect mode. IP connect mode lets you
connect projectors by specifying the projector's IP addressg.
If using easy connect mode under Windows, check the following points.
• Has automatic ESSIDgsearching been disabled? (Windows 2000/XP
only) s"Computer Wireless LAN Settings" in the EasyMP Network
Setup Guide
• Is the computer's wireless LAN driver compatible with NDIS5.1?
(Windows 2000/XP only)
• For the following, is the ESSID (network name) that has been set at
the computer identical to the ESSID at the projector?
· When using Windows98/ME
· When setting the automatic ESSID searching to off
If using a Macintosh, check the following points also.
• Is the network status correct?
· In easy connect mode, has "AirPort: On" been selected and has the
ESSID for the appropriate projector been selected?
· In access point mode, has "AirPort: On" been selected and has the
appropriate access point been selected?
· In wired LAN mode, has "AirPort: Off" been selected?
s
"Starting EMP NS Connection at the Computer" in the EasyMP
Network Setup Guide
Connecting by Specifying an IP Address
Use the following procedure to connect a projector using IP connect mode.
In the following procedure section, Window's screens are used to explain
unless otherwise noted. Similar screens will be displayed under Macintosh.
PROCEDURE
Set the projector to EasyMP standby screen.
s"Setting the Projector to Connection Standby Mode" in the
EasyMP Network Setup Guide
Start running EMP NS Connection at the computer.
sSteps 1 to 3 in "Starting EMP NS Connection at the Computer"
in the "Connecting the Computer and Projector via the Network"
section of the EasyMP Network Setup Guide
If using Windows, you can click the " " icon that is displayed in the
EMP NS Connection windows to display descriptions of various
functions.
TIP
1
2
Downloaded From projector-manual.com Epson Manuals