User`s guide

64
Using the Mail Notification Function to Report Problems
EasyMP Operation Guide
Move the cursor to the item to be set, and then press
the [Enter] button to set the item.
Some menu items require characters or numerals to be entered.
See "Entering Characters and Numerals" (sp.24) for details on
entering characters and numerals.
*For items which have a "Clear" button displayed, you can select the
"Clear" button and press the [Enter] button on the remote control to clear
the entered settings.
4
Mail
Notification
Settings
Select "ON" to receive e-mail notifications.
IP address of
SMTP server
Enter the IP address for the SMTP server used by the
projector.
You can enter numbers from 0 to 255 in each field of the IP
address. However, the following IP addresses cannot be used:
127.x.x.x, 224.0.0.0 to 255.255.255.255 (x is a number from 0
to 255.)
Port Number
Enter the port number for the SMTP server. The default setting
is "25".
You can enter a valid number from 1 to 65535.
Destination
address 1/2/3
A maximum of three e-mail addresses for destination
computers can be recorded.
An e-mail address can consist of up to 53 single-byte
alphanumeric characters.
You cannot enter any more than 32 characters at the EasyMP
configuration setting screen. You can enter more than 32
characters by making the setting using EasyWeb. sp.60
Setting a
Notification
Event
Use this to select the events that cause a mail notification to be
sent when a problem or warning occurs with the projector.
When a selected problem or warning occurs with the projector,
e-mail messages are sent to the addresses entered in
"Destination address 1/2/3" to give notification that a problem
or warning has occurred.
You can select more than one of the items displayed.
Downloaded From projector-manual.com Epson Manuals