User`s guide

61
Changing Settings Using a Web Browser (EasyWeb)
EasyMP Operation Guide
f
ff
f Entering the IP Address of the Projector
When the projector’s network advanced settings have been set to "Access
point mode", or using "Wired LAN connection mode", You can specify the
target projector with its IP to open the EasyWeb.
PROCEDURE
Start the web browser on the computer.
Enter the IP address of the projector in the address
input box of the Web browser, and press the [Enter]
key on the computer keyboard.
EasyWeb is displayed.
Projector Setup
You can make settings of items in the projector's configuration menus and
the EasyMP configuration menu window. The setting contents are applied
to the configuration menus and the EasyMP configuration settings.
f
ff
f Configuration Menu Items that can not be set by the Web
Browser
All configuration menu items can be set with the exception of the
following items.
• "Signal" - "Preset"
• "Setting" - "Pointer"
• "Setting" - "Keystone" - "Quick Corner"
• Registering a user's logo using "Extended" - "User's Logo"
• "Extended" - "Language"
• "Reset" - "All Reset", "Lamp-Hours Reset"
The items available on each menu are the same as on the configuration
menu of the projector.
s
"List of Configuration Menu Commands" in the User's Guide
f
ff
f Network Setup Items that can be set by the Web Browser
You can make all of the network-related settings in the EasyMP
configuration setting window. However, the "MAC Address" will not be
displayed.
The details for each setting are the same as for the EasyMP configuration
setting window.
s
"Connecting Using Easy Connect Mode (Wireless
LAN)" and "Connecting in Access Point Mode or Wired LAN Mode" in
the EasyMP Network Setup Guide
However, the following item can only be set using EasyWeb.
If you change the settings, click the "Apply" button to apply the new
settings.
1
2
Priority
gateway
Specifies which network to use from "Wired LAN" or
"Wireless LAN" to send problem notifications by SNMP traps
or e-mail.
For network connections using EMP NS Connection, you can
also specify different network connections.
Downloaded From projector-manual.com Epson Manuals