User`s guide

60
EasyMP Operation Guide
Changing Settings Using a Web Browser (EasyWeb)
You can set up and control the projector using the web browser of a computer
that is connected to the projector via a network. Setup and control operations
can be performed remotely if this function is used. In addition, since you can
use the computer's keyboard, entering characters required for the setup is
easier than using the remote control.
Use Microsoft Internet Explorer 5.0 or later as the web browser. If using a
macintosh, you can also use safari. However, if using safari under Macintosh
10.2, some of the EasyWeb radio buttons may not display correctly.
Displaying EasyWeb
Display EasyWeb by either of the following procedures.
f
Using the Network Screen Toolbar
PROCEDURE
Connects a computer to the projector via a network.
s
"Connecting the Computer and Projector via the
Network" in the
EasyMP Network Setup Guide
Click the "Projector Operation URL Display" icon in
the Network Screen toolbar.
Web browser starts and the browser page for setup and control is
displayed.
TIP
Setup and control are possible using a web browser if "Standby
Mode" is set to"Network ON" in the "Extended" menu of the
projector's configuration menu, even if the projector is in standby
mode (when the power is off).
TIP
If the web browser you are using is set up to connect via a proxy
server, the EasyWeb cannot be displayed. To use the EasyWeb, you
need to make network connection settings with other than a proxy
server.
1
2
Projector setup
Projector control
Downloaded From projector-manual.com Epson Manuals