User`s guide

57
EasyMP Operation Guide
Setting Image and Movie Files Display Conditions and Operation Mode
You can set the display conditions and operation mode for when playing back
image or movie files as a slideshow in CardPlayer. In this option, you can set:
Continuous Play, Screen switching time, Display order, Effect, and Mode
switching.
PROCEDURE
Tilt the [ ] button on the remote control to position
the cursor on the folder where display conditions are
to be set.
Press the following buttons on the remote control
depending on the operation mode in use.
Guide mode: Press the [Enter] button to display the Easy Menu.
Select "Options" on the menu, and press the [Enter]
button.
Quick mode: Press the [Esc] button to display the Easy Menu. Select
"Options" on the menu, and press the [Enter] button.
Set each of the items.
Enable settings by positioning the cursor on the desired item and
pressing the [Enter] button on the remote control.
Details of the items are given below.
1
2
Continuous
Play
Determines whether to repeat the slideshow.
Screen
switching time
This sets the time for a single file to be displayed
when running a slideshow. Once the time that is set
here has passed, the next file is displayed
automatically. If set to "No", the files will not change
automatically when you run a slideshow. When set to
"No", press the [Enter] or [ ] button on the remote
control to display the next file.
Display order
Sets the order of the files to be displayed.
Effect
This sets the transition effects between slides.
3
Downloaded From projector-manual.com Epson Manuals