User`s guide

52
Projecting Scenarios
EasyMP Operation Guide
The slides contained in the folder will be displayed.
Tilt the [ ] button on the remote control to move the
cursor to the slide to be played back.
Press one of the following buttons on the remote
control depending on which operating mode is being
used.
Guide mode: When you press the [Enter] button, the Easy menu is
displayed. Select "View Image" or "Play Movie" in the
menu, and press the [Enter] button.
Quick mode: Press the [Enter] button.
The selected slide will be played back. If you press
the [Enter] or [Esc] button on the remote control, the
list of slides will be displayed again. To play back a
different slide, repeat the procedure from step 4.
Editing a Scenario
You can make changes to a scenario in the memory card inserted in the
projector or in the USB storage device, such as changing the order of the
slides or hiding individual slides.
PROCEDURE
Tilt the [ ] button on the remote control to position
the cursor on the scenario icon to edit.
Press the following buttons on the remote control
depending on the operation mode in use.
Guide mode: Press the [Enter] button to display the Easy Menu.
Select "Edit Scenario" in the menu, and press the
[Enter] button.
Quick mode: Press the [Esc] button to display the Easy Menu. Select
"Edit Scenario" in the menu, and press the [Enter]
button.
4
TIP
Slides that have animation settings (with .EMA extension) will appear
in the folders. Because the folders store an animation file as separate
slides, such slides cannot be specified and projected.
5
6
1
2
Downloaded From projector-manual.com Epson Manuals