User`s guide

50
EasyMP Operation Guide
Projecting Scenarios
This chapter describes the method for playing a scenario sent to a memory
card or USB storage device, operations during scenario playback, and editing
a scenario.
Playing a Scenario
You need to have finished transferring the scenario to a memory card or
USB storage device using EMP SlideMaker2. sp.36
PROCEDURE
Start the CardPlayer.
s
p.44
The contents of the inserted memory card or USB storage are
displayed.
Tilt the [ ] button on the remote control to position
the cursor on the target scenario folder.
Press the following buttons on the remote control
depending on the operation mode in use.
Guide mode: Press the [Enter] button to display the Easy Menu. Tilt
the [ ] button up and down to select "Play Scenario"
and press the [Enter] button.
Quick mode: Press the [Enter] button.
Play the scenario. If "Advance" is set to
"Automatically", once play has continued to the end,
control returns to the file list screen. If "Revive" is
selected, the scenario will repeat from the beginning.
See "Operation During a Presentation" for how to operate the
scenario when "Advance" is set to "On mouse click" and how to
cancel and stop.
TIP
Autorun and continuous play can be set to the scenario. sp.36
1
2
3
Scenario File
4
TIP
•
Change the projection order and display/hide settings in the edit
scenario screen. sp.52
•
You can rotate JPEG format images in the scenario during they are
being projected. sp.49
Downloaded From projector-manual.com Epson Manuals