User`s guide

4
Using the Toolbar
EasyMP Operation Guide
E-Zoom
When you click the "E-Zoom" icon, the following setting window appears,
and you can use this window to adjust settings such as the zoom ratio and
position.
Basic Settings
When you click the "Basic settings" icon, the following setting window
appears so that you can make adjustments to items such as brightness,
contrast and colour mode.
E-Zoom
Adjusts the E-Zoom ratio.
[+] button: Enlarges images.
[–] button: Reduces images that have been enlarged.
These buttons operate in the same way as the [ ] and [ ] of
the projector.
Position
This specifies an area that is to be enlarged or reduced.
This works in the same way as using the E-Zoom function of
the projector to move the cursor in order to specify the area to
be enlarged or reduced.
s"E-Zoom Function" in the User's
Guide
Cancel
This cancels E-Zoom and returns the images to their original
size.
Target
projector
This shows the name of the projector that is the current target
for operations.
If more than one projector is connected, you can select which
projector is to be the target projector for E-Zoom operations.
Close
Closes the "E-Zoom" window.
E-Zoom Position
Cancel
Target projector
Close
Brightness
This adjusts the brightness of the projected images.
[+] button: Increases brightness.
[–] button: Decreases brightness.
Contrast
This adjusts the contrast of the projection area.
[+] button: Increases the difference between light and dark
shades.
[–] button: Decreases the difference between light and dark
shades.
Color mode
This operates in the same way as the [Color Mode] function of
the projector.
The setting changes as follows each time the [Color Mode]
button is clicked.
Brightness
Color mode
Close
Target projector
Contrast
Dynamic Presentation
TheatreLiving RoomsRGB
Downloaded From projector-manual.com Epson Manuals