User`s guide

46
Using CardPlayer
EasyMP Operation Guide
Press the [Enter] button on the remote control.
CardPlayer shuts down and the following screen is displayed.
Remove the memory card from the card slot.
If a digital camera or USB storage device is
connected, turn the power for the connected device
off and then disconnect it from the [USB Type A] port
of the projector.
CardPlayer Basic Operation
CardPlayer has the following two operation modes:
• "Guide mode": Displays the Easy Menu for file operation. Play files
and set options by selecting items in the Easy
Menu.
• "Quick mode": Plays files, opens folders, select slides to move
during scenario editing, and select the move
destination by pressing the [Enter] button on the
remote control without using the Easy Menu.
"Guide mode" is the initial setting. See "Setting Image and Movie Files
Display Conditions and Operation Mode" to set the operation mode.
sp.57
See "Quick Mode Operation" for operation of the quick mode. sp.48
2
3
TIP
If you leave the memory card inserted (or USB storage device
connected) when you close CardPlayer and the EasyMP standby
screen is displayed, remove the memory card (or disconnect the USB
storage device) and reinsert or reconnect it before starting
CardPlayer once more.
Downloaded From projector-manual.com Epson Manuals