User`s guide

45
Using CardPlayer
EasyMP Operation Guide
Closing CardPlayer
PROCEDURE
Tilt the [ ] button on the remote control up to point
the cursor to the "EJECT" button.
TIP
•
If the memory card contains a scenario that is set for autorun, this
scenario will be played back at highest priority. If you would like to
stop it playing back, press the [Esc] button on the remote control.
•
If the memory card is not inserted in the card slot on the projector,
or the projector and digital camera (or USB storage device) are not
connected, the following screen will be displayed.
If this happens, insert a memory card or connect a digital camera or
USB storage device so that the screen in step 3 is displayed.
•
If you connect a digital camera or other USB storage device to the
projector while a memory card is inserted into the projector and
CardPlayer is displaying the contents of the memory card, the
contents of the other device will not be displayed. In the same way, if
you connect a digital camera or other USB storage device and
CardPlayer displays the contents of that USB storage device, it will
not display the contents of a memory card if you subsequently insert
a memory card.
•
Some JPEG file may be displayed as icons instead of thumbnails. In
this event, a file icon is displayed.
1
Downloaded From projector-manual.com Epson Manuals