User`s guide

44
EasyMP Operation Guide
Using CardPlayer
CardPlayer lets you play back and project scenarios, image files and movie
files that are stored on memory cards or USB storage devices and images in
digital camera.
This section describes the basic operation of CardPlayer.
Starting CardPlayer
PROCEDURE
Carry out any of the following procedures.
• Insert a memory card into the card slot of the projector.
s"Inserting and Removing Cards" in the User's Guide
• Connect a digital camera or USB storage device to the [USB
TypeA] port of the projector.
s"Connecting USB Devices (Digital Camera, Hard Disk Drive or
Memory Devices)" in the User's Guide
Press the [Power] button on the remote control to
turn the projector on. If a digital camera or USB
storage device is connected, turn the power on for
those devices also.
Press the [EasyMP] button on the remote control and
confirm that "EasyMP" is displayed on the screen.
The CardPlayer will start and display the contents of the memory
card, digital camera or USB storage device. JPEG files are displayed
as thumbnails (file contents are displayed as small images). Other
files or folders are displayed as icons.
1
2
3
Downloaded From projector-manual.com Epson Manuals