User`s guide

43
EasyMP Operation Guide
Files that Can be Projected by the CardPlayer
The following files can be projected using CardPlayer.
Ty p e
File Type
(Extension)
Notes
Scenario .sit These are scenario files created by sending
scenarios.
Also plays audio (.wav) files set as BGM
at the time of scenario creation. You can
also project scenarios that have been
created using the EMP SlideMaker that is
included with the EMP-7850 and EMP-
735/715/505.
Image .bmp Only 24-bit colour files can be played.
.gif Images with a resolution greater than
1024 × 768 cannot be projected.
.jpg Any version. However, projection is not
possible for CMYK colour formats,
progressive formats, and images with a
resolution in excess of 2560 × 1920.
.png Projection is not possible for images with
a resolution in excess of 2560 × 1920.
Movie .mpg MPEG2-PS
If the movie exceeds a maximum size of
720 × 576, or is not in the same form as a
DVD (sequence header arranged for each
GOP) it cannot be played back.
The reproducible audio format is MPEG-1
Layer 2. Linear PCM and AC-3 audio
cannot be played back.
DPOF
g
.mrk For DPOF version 1.10, only files named
AUTPLAYx.mrk (where x is a number
between 0-9) can be projected.
TIP
•
JPEG files with the extension ".jpeg" and MPEG files with the
extension ".mpeg" cannot be projected.
•
When projecting JPEG files, the image will not be projected clearly
if compression is set too high.
•
When playing back movie files, it is recommended that you use a
CompactFlash card or a card-type hard disk drive as the memory
card. If you use some other type of memory card, the movie files may
not play back correctly. In addition, if you use a CompactFlash card
with a slow access speed or a USB storage device (when transmitting
at higher bit rates), the movie files may not play back correctly or the
sound may skip or not be output.
Downloaded From projector-manual.com Epson Manuals