User`s guide

24
Security Countermeasures for Wireless LAN
EasyMP Operation Guide
Entering Characters and Numerals
Follow the procedure below to enter characters and numerals.
1.Move the cursor to the item to be entered, and then press the [Enter]
button on the remote control. The cursor will change to green and entry
mode will be enabled.
2.To enter only numerals, press the [Num] button on the remote control.
The [Num] button will light and the buttons shown in the diagram below
will switch to numeric keypad mode so that you can enter numerals. In
addition, for items that characters can be entered, use the [ ] button to
enter a period (.).
To enter characters, tilt the [ ] button on the remote control up to scroll
through the list of characters in the order "A" - "Z" → "0" - "9" →
symbols → "a" - "z" → space. If you tilt the [ ] button down, you can
scroll through the characters in reverse. Holding down the [ ] button
makes the scroll faster and you can find target characters quickly.
3.To enter two or more characters, tilt the [ ] button on the remote control
to the right. The character or numeral in the first position will be
accepted and the cursor will move to the position for entering the next
character.
4.Once you have entered all of the characters or numerals, press the [Enter]
button on the remote control to accept the entry. The cursor will change
to yellow.
When this button is lit, the
buttons inside the box will
change to numeric
keypad mode.
Remote control
Numeric keypad
Period
Downloaded From projector-manual.com Epson Manuals