User`s guide

23
Security Countermeasures for Wireless LAN
EasyMP Operation Guide
WPA
*If you would like to change any of the settings, select the "Clear" button
and press the [Enter] button on the remote control to clear the entered
settings, and then re-enter the settings.
LEAP
*If you would like to change any of the settings, select the "Clear" button
and press the [Enter] button on the remote control to clear the entered
settings, and then re-enter the settings.
Press the [ ] button on the remote control to move
the cursor to the "OK" button, and then press the
[Enter] button.
The EasyMP standby screen will be displayed again.
PSK
Enter the PreSharedKey (cryptography key) using single-byte
alphanumeric characters.
You can enter from 8 up to a maximum of 64 characters.
When you enter the Pre Shared Key and press the [Enter]
button, the password will be displayed with asterisks (*).
You cannot enter any more than 32 characters at the EasyMP
configuration setting screen. You can enter more than 32
characters by making the setting using EasyWeb. sp.60
User name
Enter the username to be used for authentication using single-
byte alphanumeric characters. (Spaces cannot be used.)
Up to a maximum of 64 characters can be entered.
You cannot enter any more than 32 characters at the EasyMP
configuration setting screen. You can enter more than 32
characters by making the setting using EasyWeb. sp.60
Password
Enter the username to be used for authentication using single-
byte alphanumeric characters.
Up to a maximum of 64 characters can be entered.
When you enter the password and press the [Enter] button,
the password will be displayed with asterisks (*).
You cannot enter any more than 32 characters at the EasyMP
configuration setting screen. You can enter more than 32
characters by making the setting using EasyWeb. sp.60
9
Downloaded From projector-manual.com Epson Manuals