User`s guide

13
If No Connected Projectors Appear
EasyMP Operation Guide
If the following window is displayed, click "IP
connection" in the top-right corner of the window.
If "IP connect mode" appears in the top-left corner of the window,
continue on to step 5.
The projectors that have been registered in the group
will be displayed in the "Projector" list. Click the
names of the projectors you want to connect to, and
then click the "Connect" button.
The projector names are displayed in EasyMP standby screen.
The computer and projector will be connected via the network, and the
computer screen will be projected by the projector.
4
5
The connection statuses are
indicated by the icon colour
and shape as follows.
:Not connected
:Connected to other
computer
:Currently being searched
for
:Specified projector could
not be found
•
If you select a projector that is already connecting to another
computer, the other computer is automatically disconnected and
your computer's image will be projected.
•
If you select more than one projector, you can project images from
one computer to several projectors. Up to a maximum of four
projectors can be used to project images from a single computer.
•
After you have clicked the "Connect" button, you cannot connect
any more projectors.
TIP
Downloaded From projector-manual.com Epson Manuals