User`s guide

10
If No Connected Projectors Appear
EasyMP Operation Guide
The group detail setting window will be displayed. If
creating a new group, click the "New" button.
"New Group" will be displayed in "Connection Group" and the "IP
address" and the list of registered projectors will be blank.
Enter the group name in "Connection Group".
Enter the IP address for the projector to be registered
in "IP address", and then click the "Add>" button.
You can enter numbers from 0 to 255 in each field of the IP address.
3
•
To change the projectors that have been registered in a current
group, select the group name in "Connection Group" and then
continue from step 5.
•
If you click the "New" button while creating a group or editing an
existing group, the message "Group is not saved. Save?" (Windows)
or "Save changes to group? If you do not save, all changes will be
lost." (Macintosh) will be displayed. If you click "Yes" button, the
group that is currently being edited will be saved. If you click "No"
button, the group that is currently being edited will not be saved and
any changes made to the group will be lost.
TIP
4
5
You cannot use the addresses "0.0.0.0", "127.x.x.x" or "224.0.0.0 to
255.255.255.255" (x is a number from 0 to 255).
TIP
Downloaded From projector-manual.com Epson Manuals