Operation Manual

List of Configuration Menu Commands

User’s Guide

Change the settings.

(1) Tilt the [ ] button on the remote control up or down or

press the [ ] or [ ] button on the projector's control

panel to select the desired item.

The item which is presently set is displayed with

(green).

The item which is now selected is displayed with

(orange).

(2) Press the [Enter] button on either the remote control or the

projector's control panel to accept the selection.

(1) Tilt the [ ] button on the remote control to the left or

right or press the [ ] or [ ] button on the projector's

control panel to change the setting.

(2) Press the [Enter] button on either the remote control or the

projector's control panel to accept the selection.

Close the menu.

Press the [Menu] button on either the remote control or the

projector's control panel.

TIP

The items appearing in the "Signal" menu and the "Info" menu will

vary depending on the type of input source being projected.

Example 1

Example 2

TIP

• Sub-menu items which cause another sub-menu to be displayed

when they are selected have after them. If you select such menu

items and press the [Enter] button on either the remote control or the

projector's control panel you can then change the settings in the next

sub-menu which appears.

• To return to the previous screen, press the [Esc] button on either the

remote control or the projector's control panel, or select "Return"

and press the [Enter] button.

• Refer to "List of Configuration Menu Commands" for details on

each configuration menu setting item. sp.79