Operation Manual

133

List of ESC/VP21 CommandsList of ESC/VP21 Commands

User’s Guide

* The [USB Type A] port (EMP-835 only) cannot be used as a USB hub.

USB Connection Setup

In order to control the projector using ESC/VP21 commands via a USB

connection, the following preparations must be carried out.

PROCEDURE

Download the USB driver (USB-COM Driver) from the

EPSON website to your computer.

The URL is as follows.

http://esupport.epson-europe.com/downloads/en/

Install the downloaded USB driver on your computer.

Read the instructions displayed on the download screen.

Change the "COM Port" setting in the "Extended"

menu to "USB".

Turn the projector off.

Turn the projector's power back on.

Once the projector's power has turned back on, communication

via a USB connection will then be possible.

USB Connection

• Connector shape : USB(type B)

Type B

USB