Operation Manual

126

Saving a User's LogoSaving a User's Logo

User’s Guide

Select "Yes" in the sub-menu, and then press the

[Enter] button on either the remote control or the

projector's control panel.

The image to be recorded and a selection marquee

box will be displayed, so move the marquee box to

select the part of the image to use.

Tilt the [ ] button on the remote control or press the [ ],

[ ], [ ] and [ ] buttons on the projector's control panel to

select the part of the image to use as the user's logo, and then

press the [Enter] button on either the remote control or the

projector's control panel.

TIP

If "Yes" is accepted, since the image will be projected at their original

image signal resolution, images with the different resolution from the

projector's and video images will be projected at different size.

TIP

User's logos can be saved at up to 480 × 360 dots in size.