Operation Manual

99
Problem SolvingProblem Solving
User’s Guide
When the Indicators Provide No Help
First refer to the following problems to determine what type of problem it is that you are having, and then refer to the page containing details of the problem.
No images appear sp.101
Projection does not start, the projection area is completely black, the
projection area is completely blue, etc.
Projection stops automatically sp.101
The message "Not Supported." is displayed sp.102
The message "No Signal." is displayed sp.102
Images are fuzzy or out of focus sp.103
Interference or distortion appear in images sp.103
Problems such as interference, distortion or black & white checked
patterns appear.
Image is truncated (large) or small sp.104
Only part of the image is displayed.
Image colours are not right sp.104
The whole image appears purplish or greenish, images are black &
white, colours appear dull, etc.
(Computer monitors and LCD screens have different colour
reproduction performance, so that the colours projected by the
projector and the colours appearing on the monitor may not
necessarily match, but this is not a sign of a problem.)
Images appear dark sp.105
Problems Relating to Images
No sound can be heard or the
sound is faint sp.105
The remote control does not work
sp.106
The fans do not stop when power is turned off s p.106
Other Problems