Quick Start Guide

ManualsBrandsEpson ManualsVideo projector projectoremp 8300 lcd projector

Signal Refresh rate (Hz) Resolution (dots)

Resolutions for resized display (dots)

EMP-9300 EMP-8300

SVGA

XGA

SXGA

SXGA+

UXGA

MAC13"

MAC16"

MAC19"

MAC21"

SDTV

(525i,525p,625i,625p)

HDTV(750p)

HDTV(1125i,1125p)

VGA

EGA

56/60/72/75/85/100/120, iMac

60/72/75/85/100/120, iMac

60/70/75/85/100, iMac

60/70/75/85

60/75/85

60/65/70/75/80/85

640 × 480

800 × 600

1024 × 768

1152 × 864

1280 × 960

1280 × 1024*

1400 × 1050

1600 × 1200

640 × 480

832 × 624

1024 × 768

1152 × 870

640 × 350

1024 × 768

960 × 768

1024 × 768

1016 × 768

1024 × 768

(4:3 aspect ratio)

1024 × 576

(16:9 aspect ratio)

1024 × 576

1400 × 1050

1312 × 1050

1400 × 1050

(4:3 aspect ratio)

1400 × 788

(16:9 aspect ratio)

1400 × 788

1024 × 560

VGACGA

640 × 400

1024 × 640

VGAEGA

640 × 350

1024 × 560

VGA text

720 × 350 1024 × 498

720 × 400

1400 × 766

1400 × 875

1400 × 766

1400 × 680

1400 × 778 1024 × 569

Printed on 100% recycled paper.

*1 Connection is not possible if the equipment does not have a VGA output port.

*2 The resolution for real display is the virtual (window) display resolution.

It may be possible to project signals which are not listed in the above table.

However, not all functions may be supportable with such signals.

User's Guide

"List of Supported Monitor Displays"

404696900E

03.09-.6A(C05)

Printed in Japan

List of Supported Monitor Displays

Before setting up and using this

projector, be sure to read the

User's Guide.

Do not look directly into the

projector's lens.

WARNING

Connections .................................1

Projection Preparation and

Adjustments ..................................3

Turning the Projector off ................5

Functions for Enhancing

Projection ..................................... 6

List of Configuration Setting

Menus .........................................10

Troubleshooting ...........................11

List of Supported Monitor

Displays ...........................Last page

Quick Reference Guide

9300E_cover1-4

Summary of content (16 pages)

PAGE 1
9300E_cover1-4 Do not look directly into the projector's lens. WARNING Before setting up and using this projector, be sure to read the User's Guide. List of Supported Monitor Displays ...........................Last page Connections .................................1 Projection Preparation and Adjustments ..................................3 Turning the Projector off ................5 Functions for Enhancing Projection ..................................... 6 List of Configuration Setting Menus ...........
PAGE 2
9300E-QRG_01-14 Connections Be sure to turn the power for all components off before making any of the following connections. User's Guide "Connecting to a Computer" "Connecting to a Video Source" Connecting to a computer The [Audio] port to use is the port that is in the same box as the port being used to input the video signals. * An accessory audio cable is not supplied with the EMP-9300. Use a commercially-available audio cable instead.
PAGE 3
9300E-QRG_02-13 Reading the indicators (Temperature) indicator The projector is provided with indicators to notify you of the operating status of the projector. The following tables show what the indicators mean and how to remedy the problems that they indicate.
PAGE 4
9300E-QRG_03-12 Projection Preparation and Adjustments Set the [R/C] switch to "ON". User's Guide "Turning the Projector On" Check that the power cable is connected to the projector and to the electrical outlet. With the EMP-9300, if you change the setting for the "Direct Power ON" command in the "Advanced2" menu to "ON", the projector's power will turn on and projection will start at once when you insert the power plug into the wall outlet.
PAGE 5
9300E-QRG_04-11 Troubleshooting Using the help function User's Guide "Troubleshooting" If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. Help Menu Help for the image Help for the sound Language selection (Language) 1. Press the 2. Use the If the suggested solution in Help doesn't solve the problem, unplug the power from the wall outlet and contact your local dealer.
PAGE 6
9300E-QRG_05-10 Adjusting projected images Moving projected images vertically (Lens shift) Changing the colour mode The colour mode changes as follows each time this button is pressed Theatre Presentation Up Down Dynamic sRGB Living Room User's Guide "Selecting the Projection Quality (Colour Mode Selection)" Making fine adjustments to the projection area size (Zoom) Retrieving preset settings Increase Decrease (Adjustment is only possible when analogue RGB signals are being input) The "Video" me
PAGE 7
9300E-QRG_06-09 Other useful functions Brightness Control (EMP-8300 only) This lets you set the lamp brightness to one of two settings. Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When used at low brightness, the life of the lamp will be extended. Freeze Function The images are paused and unpaused each time this button is pressed.
PAGE 8
9300E-QRG_07-08 Enlarging parts of an image E-Zoom Function This function lets you enlarge and reduce parts of images such as graphs and tables that you would like to view in greater detail.
PAGE 9
300E-QRG_07-08 Enlarging parts of an image E-Zoom Function This function lets you enlarge and reduce parts of images such as graphs and tables that you would like to view in greater detail.
PAGE 10
9300E-QRG_06-09 Other useful functions Brightness Control (EMP-8300 only) This lets you set the lamp brightness to one of two settings. Select "Low" if the images being projected are too bright such as when projecting images in a dark room or onto a small screen. When used at low brightness, the life of the lamp will be extended. Freeze Function The images are paused and unpaused each time this button is pressed.
PAGE 11
9300E-QRG_05-10 Adjusting projected images Moving projected images vertically (Lens shift) Changing the colour mode The colour mode changes as follows each time this button is pressed Theatre Presentation Up Down Dynamic sRGB Living Room User's Guide "Selecting the Projection Quality (Colour Mode Selection)" Making fine adjustments to the projection area size (Zoom) Retrieving preset settings Increase Decrease (Adjustment is only possible when analogue RGB signals are being input) The "Video" me
PAGE 12
9300E-QRG_04-11 Troubleshooting Using the help function User's Guide "Troubleshooting" If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. Help Menu Help for the image Help for the sound Language selection (Language) 1. Press the 2. Use the If the suggested solution in Help doesn't solve the problem, unplug the power from the wall outlet and contact your local dealer.
PAGE 13
9300E-QRG_03-12 Projection Preparation and Adjustments Set the [R/C] switch to "ON". User's Guide "Turning the Projector On" Check that the power cable is connected to the projector and to the electrical outlet. With the EMP-9300, if you change the setting for the "Direct Power ON" command in the "Advanced2" menu to "ON", the projector's power will turn on and projection will start at once when you insert the power plug into the wall outlet.
PAGE 14
9300E-QRG_02-13 Reading the indicators (Temperature) indicator The projector is provided with indicators to notify you of the operating status of the projector. The following tables show what the indicators mean and how to remedy the problems that they indicate.
PAGE 15
9300E-QRG_01-14 Connections Be sure to turn the power for all components off before making any of the following connections. User's Guide "Connecting to a Computer" "Connecting to a Video Source" Connecting to a computer The [Audio] port to use is the port that is in the same box as the port being used to input the video signals. * An accessory audio cable is not supplied with the EMP-9300. Use a commercially-available audio cable instead.
PAGE 16
9300E_cover1-4 Do not look directly into the projector's lens. WARNING Before setting up and using this projector, be sure to read the User's Guide. List of Supported Monitor Displays ...........................Last page Connections .................................1 Projection Preparation and Adjustments ..................................3 Turning the Projector off ................5 Functions for Enhancing Projection ..................................... 6 List of Configuration Setting Menus ...........