Operation Manual

70 - Menu Operations
Effect Bar Sets the color, direction and width of the bar allocated to the
[4] button.
Press the [Enter] button and select the required item from the
bar setup menu. The color, direction and width can be
selected independently for each of the settings between 1
and 3.
· The [4] button executes the bar function. The bar types will
be switched between 1 and 3 sequentially for each time the
[4] button is pressed. (see page 61
)
Individual
settings
between types 1
to 3
Cursor Speed Selects the speed of Cursor.
L: Slow M:Medium H:Fast
M
Reset Returns all effect menu adjustment values to the default val-
ues.
Press the [Enter] button and then select [Yes] on the confir-
mation screen displayed.
· Select [Reset All] to return all image and sound values to
the default settings. (see page 72
)
-
Setting Keystone Adjusts trapezoid distortion.
· The screen will be reduced in size when keystone correction
has been performed.
· The status of keystone correction will be recorded. Perform
readjustments that match the installation position when the
projection position or angle have been changed.
· Reduce the sharpness if blurring occurs after keystone
correction. (see page 68
)
Center value (0)
P in P Sets the input source for the P in P function’s sub-screen.
· The P in P function is executed by pressing the [PinP]
button. (see page 62
)
Composite
No Signal Msg The status for [No Image Signal Input] and other message
display.
· The user logo must be registered and set up before it can be
amended.
Blue
Prompt Sets whether to display the input source on the screen or not. ON
A/V Mute Sets up the screen status for when the [A/V Mute] button is
pressed.
· User logos must be registered and set up before they can be
amended.
Black
BNC Sets the mode for the input image signals connected to the
BNC port.
RGB: Enables RGB signals to be input.
YCbCr: Enables video signals to be input (YCbCr or YPbPr.)
RGB
To p
Menu
Sub Menu Function Default Value