Operation Manual

70 - Menu Operations
· The image menu and information displayed will differ in accordance with the projected input
source, and Menus other than that belonging to the projected input source cannot be adjusted.
· The information menu displays the status of the input source settings being projected.
Advanced Comp2Sync Ter-
mination
Sets the Computer #2 termination mode to enable image
processing from a Port.
On: Terminated in analog (75Ω)
OFF: TTL input
· Usually used at [OFF]. Set at on with the switcher when
analog 75Ω termination is required.
OFF
Rear Proj. Set at [ON] to project images onto a half-transparent
screen from the rear. The projected image will be
inverted.
OFF
Ceiling Set at [ON] to project images when suspended from the
ceiling. The projected image can be be inverted from left
to right and up and down.
· The optional ceiling suspension unit is required to
suspend the projector from the ceiling. (see page 89
)
OFF
Reset Returns all advanced setting menu adjustment values to
the default values.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
· Select [Reset All] to return all image and sound values
to the default settings.
-
About (Displays the current settings) -
Reset All Execute Returns all items in the set-up menus to the default val-
ues.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
· Execute the [Reset] function from each individual sub
menu to return the image and sound settings to the
default values for each menu.
· The user logo, lamp time, language and BNC settings
will not be returned to the default values. Perform the
reset procedure after the lamp has been replaced. (see
page 86)
-
Top Menu Sub Menu Function Default Value