Operation Manual

68 - Menu Operations
Effect Bar Sets the color, direction and width of the bar allocated to
the [4] button on the remote control unit.
Press the [Enter] button and select the required item
from the bar setup menu. The color, direction and width
can be selected independently for each of the settings
between 1 and 3.
· The [4] button executes the bar function. The bar types
will be switched between 1 and 3 sequentially for each
time the [4] button is pressed. (see page 59
)
Individual
settings
between types 1
to 3
Cursor Speed Selects the speed of Cursor.
L: Slow M:Medium H:Fast
M
Reset Returns all effect menu adjustment values to the default
values.
Press the [Enter] button and then select [Yes] on the con-
firmation screen displayed.
· Select [Reset All] to return all image and sound values
to the default settings. (see page 70
)
-
Setting Keystone Adjusts images which appear trapezoidal.
· The screen will be reduced in size when keystone
correction has been performed.
· The status of the keystone correction will be recorded.
Perform readjustments that match the installation
position when the projector position or angle have been
changed.
· Reduce the sharpness if blurring occurs after keystone
correction. (see page 66
)
Center value (0)
P in P Sets the input source for the P in P function’s sub-screen.
· The P in P function is executed by pressing the [PinP]
button on the remote control unit. (see page 60
)
Composite
No Signal Msg The status for [No Image Signal Input] and other mes-
sage display.
· The user logo must be registered and set up before it
can be amended.
Blue
Prompt Sets whether to display the input source on the screen or
not.
ON
A/V Mute Sets up the screen status for when the [A/V Mute] but-
ton is pressed.
· User logos must be registered and set up before they
can be amended.
Black
BNC Sets the mode for the input image signals connected to
the BNC port.
RGB: Set when the input is a RGB signal.
YCbCr: Set when the input is a component video signal
(YCbCr).
YPbCr: Set when the input is a component video signal
(YPbCr).
RGB
Top Menu Sub Menu Function Default Value