Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
51
Functions for Enhancing Projection
User’s Guide
Freeze
This function pauses only the projected images. The sound keeps playing
without pausing.
The image source will still be playing back the images even while
projection is paused, and so it will not be possible to resume projection
from the point where it was paused.
PROCEDURE
Press the [Freeze] button.
The images will then be paused.
To cancel the pause, press the [Freeze] button once more.
You can also cancel it by pressing the [Esc] button.
Wide-screen Projection of Images from Video
Equipment (Changing the Aspect Ratio)
This function changes the aspect ratiog of images from 4:3 to 16:9 when
component video
g images, S-Videog or composite videog images are
being projected.
Images which have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format.
PROCEDURE
The aspect ratio changes each time the [Resize] button is
pressed.
Remote control
TIP
•Pressing the [Freeze] button also clears configuration menu displays
and help messages.
•The freeze function still works while the E-Zoom function is being
used.
When images in squeeze
mode are projected at 16:9
When images in Squeeze
modeg are projected at 4:3
Remote control
TIP
You can also make this setting using the "Resize" command in the
"Signal" menu.