Projector User Manual
Table Of Contents
- Projector Features
- Contents
- Before Using the Projector
- Part Names and Functions
- Before Using the Remote Control
- Installation
- Inserting and Removing Cards (EMP-765/755 only)
- Connecting to a Computer
- Connecting to a Video Source
- Playing Sound from Video Equipment
- Playing Sound from External Speakers (EMP-765/755 only)
- Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-765/755 only)
- Preventing theft (Password Protect)
- Basic Operations
- Advanced Operations
- Troubleshooting
- Appendices
24
User’s Guide
Connecting to a Video Source
Projecting Composite Videog Images
Use a commercially- available A/V cable to make the connection.
CAUTION
When connecting the projector to video equipment, take the following
precautions.
•Turn the power off for both the projector and the video equipment
before connecting them. If the power for either device is on at the
time of connection, damage may result.
•Check the shapes of the cable connectors and the device ports before
making the connections. If you try to force a connector to fit a device
port with a different shape or number of terminals, a malfunction or
damage to the connector or port may result.
•Do not bind the power cable and the connecting cable together. If the
power cable and the connecting cable are bound together, image
interference or errors in operation may result.
To video output port (yellow)
To [Video] port (yellow)
A/V cable
(commercially-available)
To audio output
port sp.27
To [Audio] port
Connect the cable using the
audio adapter that is supplied
with the projector.
sp.27
TIP
If more than one input source is connected to the projector at the
same time, you can use button operations to select the signals to be
projected. sp.37