User’s Guide
Notations Used in This Guide Indicates procedures which may result in damage or injury if sufficient care is not taken. Indicates additional information and points which may be useful to know regarding a topic. s Indicates a page where useful information regarding a topic can be found. Click on the page number to display that page. Indicates that an explanation of the underlined word or words in front of this symbol appears in the glossary of terms.
Contents Projector Features..................................................................4 Part Names and Functions.....................................................6 Front/Top .................................................................................... 6 Control Panel .............................................................................. 7 Rear ............................................................................................. 8 Base.........................................
Contents Appendices Installation ............................................................................55 Setting Up the Projector............................................................ 55 Maintenance.........................................................................56 Cleaning .................................................................................... 56 Replacing Consumables............................................................
Projector Features Direct Power On & Instant Off The direct power on function means you can turn the projector on simply by plugging the power cable into the electrical outlet. sp.37 Also, with the instant-off function you can finish quickly by unplugging the power cable immediately after use. 4 Easy to use, big button control panel For ease of use, buttons are classified and arranged according to their projection and adjustment functions. sp.
Projector Features Colour Mode You can enjoy images of "Photos", "Presentations", "Games", and so on, in the optimum colour tone by choosing the most suitable mode for your surroundings. sp.15 Security Function Manage users with password protect You can set up a password to restrict the use of the projector. sp.
Part Names and Functions 6 Front/Top • Control panel sp.7 • Security lock ( ) sp.67 • Lamp cover sp.59 Open this cover when replacing the projector's lamp. • Focus ring sQuick Start Guide Adjusts the image focus. • Air exhaust vent • Remote control light-receiving Do not place objects that may become warped or otherwise affected by heat near the air exhaust vent and do not bring your face or hands near the air exhaust vent while projection is in progress.
7 Part Names and Functions Control Panel • [Menu] button sp.32 • [Enter] button sp.12, p.32 Displays and closes the configuration menu. Automatically adjusts analogue RGB images from computers and RGB video images to the optimum images. If a configuration menu or help screen is displayed, it accepts and enters the current selection. • [Power] button sQuick Start Guide Turns the projector power on or off. • [Esc] button sp.32 • Indicator states Stops the current function.
8 Part Names and Functions Rear • Computer port • S-Video port • Video port • USB port sp.24, p.68 sQuick Start Guide sQuick Start Guide sQuick Start Guide Inputs analogue RGB video signals from a computer and RGB video signals and component videog signals from other video sources. Inputs S-Videog signals to the projector from other video sources. Inputs composite videog signals to the projector from other video sources.
9 Part Names and Functions Base • Foot adjust lever • Front adjustable foot • Air intake vent sp.56 • Air filter (air intake vent) sp.56, p.62 Clean the air intake vent periodically. This prevents dust and other foreign particles from getting inside the projector when air is drawn in. It should be cleaned and replaced periodically. • Suspension bracket fixing points (3 points) sp.55, p.64 Attach the optional ceiling mount here when suspending the projector from a ceiling.
10 Part Names and Functions Remote Control If you position the over the button icon or button name, a description of that button will appear. • [Page down] [Page up] buttons sp.25 • Remote control light-emitting area sQuick Start Guide • [E-Zoom] button ( ) ( ) sp.23 • [Power] button sQuick Start Guide • [Enter] button sp.25, p.32 • [ ] buttons sp.25, p.32 • [Esc] button sp.25, p.32 • [Freeze] button sp.21 • [Pointer] button sp.22 • [A/V Mute] button sp.20 • [Computer] button sp.
Adjusting and changing the image This chapter explains how to adjust the quality of the image, the volume, the colour mode selection and so on, and also how to change the image. Adjusting the Image Quality .............................. 12 • Adjusting Computer Images and RGB Video Images.....12 •Automatic Setup ........................................................................ 12 •Adjusting the Tracking .............................................................. 12 •Adjusting the Sync.............
Adjusting the Image Quality Adjusting Computer Images and RGB Video Images Automatic Setup Automatic setup detects analogue RGB signals coming from a connected computer, and automatically adjusts these signals so that the optimum images can be obtained. Automatic setup involves adjustment of the following three items: Trackingg, Position and Sync (synchronisation)g. If "Auto Setup" in the "Signal" menu is set to "Off", automatic setup is not carried out.
13 Adjusting the Image Quality the tracking until the vertical stripes disappear B Adjust from the image. Using the remote control Using the control panel Adjusting the Sync If flickering, fuzziness or interference appear in computer or RGB video images, and this cannot be fixed using automatic setup, you will need to adjust the Sync (synchronisation)g manually using the following procedure. PROCEDURE "Signal" from the configuration menu, and A Select then select "Sync.".
14 Adjusting the Image Quality the synchronization until the horizontal noise B Adjust disappears from the image. Using the remote control Using the control panel The sync value increases or decreases each time a button is pressed. the [Menu] button to exit the configuration C Press menu. • If you adjust the sync without adjusting the trackingg first, it will not be possible to get the best adjustment results. Incorrect tracking adjustment may not be noticeable with some types of picture.
15 Adjusting the Image Quality Selecting the Projection Quality (Color Mode) The following seven preset colour modes are available for use depending on the characteristics of the images that are being projected. You can easily obtain the optimum image quality simply by selecting the colour mode that corresponds to the projected images. The brightness of the images will vary depending on which colour mode is selected.
Adjusting the Projection Position (Image Shift) When you cannot setup this projector directly in front of the screen, the projection position can be finely tuned without moving this projector. PROCEDURE the button on the projector, perform zoom A Using adjustment or keystone correction. sQuick Start Guide The Image Shift adjustment screen is displayed after you finish making adjustments. B Adjust projection position.
Adjusting the Volume The volume of the projector's built-in speaker can be adjusted as follows. PROCEDURE Remote control When the button is pressed to the [ ] side, the volume increases, and when it is pressed to the [ ] side, the volume decreases. The volume gauge appears on the screen when the volume is being adjusted. • If the value displayed in the gauge on the screen stops changing when the volume is being adjusted, it indicates that the limit for volume adjustment has been reached.
Changing the Projected Image (Source Search) Automatically Detect Incoming Signals and Change the Projected Image (Source Search) The picture signal input from the connected equipment is automatically detected and projected. Computer S-Video Video 18 • When your video equipment is connected, start playback. • The following screen is displayed when only the picture signal projected now is input, or when no picture signal is input. You can choose the input source from this screen.
Useful Functions This chapter explains useful functions for giving presentations and so on, and the security functions. Functions for Enhancing Projection ................. 20 Security functions............................................... 26 • Pausing the Image and Sound Temporarily (A/V Mute) ...........................................................................20 • Freezing the Image (Freeze) ...............................................21 • Changing the Aspect Ratio (Resizing)...............
Functions for Enhancing Projection Pausing the Image and Sound Temporarily (A/V Mute) For example, this can be used if you want to pause the projection for a moment and focus the audience’s attention on what you are saying. Or if you are making a computer presentation and you do not want to show details, such as selecting different files. PROCEDURE Using the projector Using the remote control You can turn A/V Mute on or off by opening and closing the A/V mute slide or pressing the [A/V Mute] button.
21 Functions for Enhancing Projection Freezing the Image (Freeze) The source image continues to project even when the screen is frozen. You can still perform operations such as changing files, without projecting any images. PROCEDURE Changing the Aspect Ratio (Resizing) This function changes the aspect ratiog of images from 4:3 to 16:9 when component videog, S-Videog, or composite videog images are being projected.
22 Functions for Enhancing Projection Displaying the Pointer (Pointer) This allows you to move a pointer icon on the projected image, and helps you draw attention to the area you are talking about. B Move the pointer icon. Remote control Pointer icon PROCEDURE A Display the pointer. Remote control Each time you press the button the pointer appears or disappears. You can use the "Pointer Shape" command in the "Settings" menu to change the shape of the pointer to one of three different shapes. sp.
23 Functions for Enhancing Projection Enlarging Part of the Image (E-Zoom) This is useful when you want to see images in greater detail, such as graphs and details in a table. the cross to the area of the image that is to be B Move enlarged or reduced. Remote control Cross PROCEDURE A Start E-Zoom. C Enlarge. Remote control Remote control You can reduce the enlarged image by pressing the [-] button. To cancel the E-Zoom, press the [Esc] button. • The enlargement ratio will appear on the screen.
24 Functions for Enhancing Projection Using the Remote Control to Operate the Mouse Pointer (Wireless Mouse) If the USB terminal of a computer and the USB terminal on the back of this projector are connected by a commercially available USB A-B cable, you can use the projector’s remote control like a wireless mouse to control the computer’s mouse pointer. Computer Windows 98/2000/Me/XP Home Edition/XP Professional Macintosh (OS 8.6 to 9.2/10.0 to 10.
25 Functions for Enhancing Projection Once the connection has been made, the mouse pointer can be operated as follows. Moving the mouse pointer Mouse clicks Left click Right click Double-click: Press twice in rapid succession. Drag and drop This is useful for displaying the previous or next slide in a PowerPoint slideshow. To previous slide 1. Hold down the [Enter] button and tilt and drag the [ ] button. 2. Release the [Enter] button to drop at the desired location.
Security functions 26 Preventing theft (Password Protect) When the Password Protect function is activated, people who do not know the password will not be able to use the projector to project images, if the power has been disconnected since the password was last entered correctly. Furthermore, the user's logo that is displayed on the background of the screen cannot be changed. This is effective against theft. At the time of purchase, the password protection function is not enabled.
27 Security functions When "Password Timer" is set to "On" and "Timer" is used The password entry screen will not be displayed at all when the power is turned on until the length of time that has been set has elapsed. When the set length of time has elapsed, the password entry screen will be displayed each time the power is turned on. The length of time referred to here is the total illumination time for the projector's lamp from the point when the projector's menu is closed.
Security functions "Password Timer" on. C Turn If you don't use this setting, proceed to step 4. (1) Select "Password Timer", and then press the [Enter] button. (2) Select "On", and then press the [Enter] button. (3) Press the [Esc] button. (4) Select "Timer" and then press the [Enter] button. (5) While holding down the [Num] button, use the numeric keypad buttons to enter the setting time within the range of 1 to 9999 hours and then press the [Enter] button.
29 Security functions Operation Button Lock Function This function locks the buttons on the projector's control panel. This function is useful at times such as during show events so that only projection is carried out deactivating all buttons operation, or in places such as schools to limit the range of buttons that can be operated. to "On". B Set If set to "On", none of the buttons on the control panel except the [Power] button can be operated.
Security functions the confirmation message is displayed, select C When "Yes". The control panel buttons will be locked in accordance with the selected setting. There are two methods to cancel the projector's control panel lock. • Using remote control, change the "Settings" "Operation Lock" in the configuration menu to "Off" . • Hold down the projector's [Enter] button continuously for about 7 seconds, a message will be displayed and the lock will be cancelled.
Configuration Menu This chapter explains how to use the configuration menu and its functions. Using the Configuration Menu........................... 32 List of Functions................................................. 33 • "Image" Menu.....................................................................33 • "Signal" Menu.....................................................................34 • "Settings" Menu..................................................................35 • "Extended" Menu ...........
Using the Configuration Menu from A Selecting the top menu from B Selecting the sub menu 32 the C Changing selected item Buttons used Using the control panel Top menu Using the remote control guide Sub menu (Settings) Select the setting to change.
List of Functions 33 "Image" Menu The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source. Computer/RGB video Component videog/ Composite videog/ S-Videog Sub-menu Color Mode Brightness Contrastg Color Saturation Tint Sharpness Color Temp.g Color Adjustment Reset Function Select the quality of the image to suit your surroundings. sp.15 Adjusts the image brightness.
34 List of Functions "Signal" Menu The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source. Computer/RGB video Sub-menu Auto Setup Component videog Composite videog/ S-Videog Function Selects whether the automatic adjustment function for automatically optimising images when the input source is changed is turned "On" or "Off". sp.
35 List of Functions "Settings" Menu Sub-menu Keystone Zoom Image Shift Operation Lock Pointer Shape Brightness Control Volume Reset Function Corrects vertical keystone distortion in images. sQuick Start Guide Adjusts the size of the projected image. sQuick Start Guide Wide: Larger Tele: Smaller Adjusts the projection position. sp.16 When set to "On", the operation of all buttons on the projector's control panel except for the [Power] button will be disabled. sp.
36 List of Functions "Extended" Menu Sub-menu Display Projection Function This lets you make settings related to the projector's display. Message: Sets whether the input source name or colour mode name or a message is displayed on the screen ("On") or not displayed ("Off") at times such as when the input source or colour mode is changed or when no image signals are being input. Display Background: Sets the screen status when no image signals are being input to "Black", "Blue" or "Logo".
37 List of Functions Sub-menu Operation Link 21L Language Reset Function Direct Power On: Sets whether direct power on is enabled ("On") or disabled ("Off"). When you set to "On" and leave the power cable connected to a wall socket, be aware of that sudden surges of electricity that may occur when power comes back on after a power outage may cause the projector to turn on automatically. Sleep Mode: Sets whether projection stops automatically ("On") or not ("Off") in the following situations.
38 List of Functions "Info" Menu Lets you check the status of the image signals being projected and the status of the projector. (Display only) Computer/RGB Video/Component videog Sub-menu Lamp Hours Composite videog/ S-Videog Function Shows the cumulative lamp operating time. If it reaches the lamp warning time, the characters are displayed in yellow. The cumulative operating time from 0 to 10 hours will be displayed as "0H". From "10H" onwards, the display will be in units of 1 hour.
39 List of Functions "Reset" Menu Sub-menu Reset All Reset Lamp Hours Function Resets all items in all menus to their default settings. •The "Computer Input", "Zoom", "Image Shift", "Lamp Hours" and "Language" settings will not be reset to their defaults. Clear the cumulative lamp operating time and reset to "0H". Perform this procedure when you replace the lamp.
Troubleshooting This chapter describes how to identify problems and what to do if a problem is found. Using the Help..................................................... 41 Problems Solving................................................ 43 • Reading the Indicators........................................................43 •Power indicator lights red .......................................................... 43 •Lamp or Temp indicator flashes orange ....................................
Using the Help 41 If a problem occurs with the projector, the Help function uses on-screen displays to assist you in solving the problem. It uses a series of menus in a question and answer format. B Select a menu item. PROCEDURE A Display the Help menu. Using the remote control Using the control panel Using the remote control C Confirm the selection.
Using the Help the operations in steps 2 and 3 to proceed D Repeat through the menu to more detailed items. E Press the [Help] button to exit the help menu. If the Help function does not provide a solution to the problem, refer to "Problem Solving" sp.
Problems Solving 43 If you are having a problem with the projector, first check the projector's indicators and refer to "Reading the Indicators" below. If the indicators do not show clearly what the problem might be, refer to "When the Indicators Provide No Help". sp.46 Reading the Indicators The projector is provided with the following three indicators which indicate the operating status of the projector. Indicates the operating status of the projector.
44 Problems Solving : lit Status Power Red Cause High temperature error (overheating) Red Power Red Red Lamp problem Lamp timer failure Lamp cover is open : flashing : off Remedy or Status The lamp will turn off automatically and projection will stop. Wait for about 5 minutes. After about 5 minutes the projector will switch to standby mode, so check the following two points. After checking, press the [Power] button to turn the power back on.
45 Problems Solving : lit Lamp or Temp indicator flashes orange Warning Status Power Red Cause High temperature warning Orange Lamp replacement notification Power Orange : flashing : off Remedy or Status (This is not an abnormality, but if the temperature rises too high again, projection will stop automatically.) •Check that the air filters and air exhaust vent are clear and that they are not up against a surface such as a wall. •If the air filters are clogged, clean or replace them. sp.56, p.
46 Problems Solving When the Indicators Provide No Help If any of the following problems occur and the indicators do not offer a solution, refer to the pages given for each problem. Problems relating to images Problems when projection starts No images appear sp.47 Projection does not start, the projection area is completely black, the projection area is completely blue, and so on. Power does not turn on sp.52 Projection stops automatically sp.47 Other problems The message "Not Supported.
47 Problems Solving Problems relating to images No images appear Check Remedy Was the [Power] button pressed? Press the [Power] button to turn the power on. Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally. Connect the projector's power cable correctly. sQuick Start Guide Check that your power supply socket is working. Is A/V Mute mode active? Press the [A/V Mute] button on the remote control to cancel the mute. sp.
48 Problems Solving The message "Not Supported." is displayed Check Are the image signal format settings correct? Remedy If a composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu command to select the signal format. "Signal" - "Video Signal" sp.
49 Problems Solving Images are fuzzy or out of focus Check Remedy Has the focus been adjusted correctly? Turn the focus ring on the projector to adjust the focus. Is the projector at the correct distance? The recommended projection distance ranges from 87cm to 1212cm. sQuick Start Guide Is the keystone adjustment value too large? Decrease the projection angle to reduce the amount of keystone correction. sQuick Start Guide Is the zoom adjustment value too small? Enlarge the zoom adjustment value.
50 Problems Solving Image is truncated (large) or small Check Remedy Has the "Aspect ratiog" been set correctly? Press the [Resize] button on the remote control. sp.21 Is the image still being enlarged by the E-Zoom function? Press the [Esc] button on the remote control to cancel the E-Zoom function. sp.
51 Problems Solving Image colours are not right Check Remedy Do the input signal settings match the signals from the connected device? If a composite videog or S-Videog source is connected to the projector, use the "Video Signal" menu command to select the video signal format. "Signal" - "Video Signal" sp.34 Has the image brightness been adjusted correctly? Use the "Brightness" menu command to adjust the brightness. "Image" - "Brightness" sp.
52 Problems Solving Problems when projection starts Power does not turn on Check Remedy Have you pressed the [Power] button? Press the [Power] button to turn the power on. Are all of the indicators switched off? The power cable is not connected correctly or power is not being supplied. Connect the power cable to the projector correctly. sQuick Start Guide Alternatively, check the circuit breaker to see if power is being supplied.
53 Problems Solving The remote control does not work Check Remedy Is the remote control light-emitting area facing towards the remote control lightreceiving area when it is operated? Face the remote control towards the remote control light-receiving area. The operating angle for the remote control is approximately ±30º horizontally and approximately ±15º vertically. sQuick Start Guide Is the remote control too far from the projector? The operating range for the remote control is approximately 6m.
Appendices This chapter provides information on maintenance procedures to ensure the best level of performance from the projector. Installation ........................................................... 55 Screen Size and Projection Distance ................ 65 • Setting Up the Projector .....................................................55 Glossary............................................................... 66 Maintenance ........................................................ 56 • Cleaning ...
Installation Setting Up the Projector 55 • Front/ceiling projection (Front/Ceiling projection) The projector supports the following four different projection methods, allowing you to choose the best method for displaying your images. • For ceiling mount installation (suspending from the ceiling), a special installation procedure is required. Failure to install correctly may result in injury or damage if the projector falls.
Maintenance This section describes maintenance tasks such as cleaning the projector and replacing consumable parts. Cleaning You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate. 56 Cleaning the Air Filter and Air Intake Vents If dust collects on the air filter or the air intake vents, it can cause the internal temperature of the projector to rise, and this can lead to problems with operation and shortening of the optical engine's service life.
57 Maintenance Replacing Consumables This section explains how to replace the remote control batteries, the lamp, and the air filters. B Insert the batteries. Check the positions of the (+) and (–) marks inside the battery holder to ensure that the batteries are inserted the correct way. Replacing the batteries If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat.
58 Maintenance Lamp Replacement Period It is time to replace the lamp when: • The message "Replace the Lamp." appears on the screen when projection starts A message will be displayed. • When the Lamp indicator is flashing orange Flashing orange • The projected image gets darker or starts to deteriorate • The lamp replacement message is set to appear after the following periods of time in order to maintain the initial brightness and quality of the projected images. "Brightness Control" sp.
59 Maintenance Replacing the Lamp • When replacing the lamp because it has stopped illuminating, there is a possibility that the lamp may be broken. If replacing the lamp of a projector which has been installed on the ceiling, you should always assume that the lamp is broken, and you should stand to the side of the lamp cover, not underneath it. Remove the lamp cover gently. Small pieces of glass may fall out when the lamp cover is opened.
60 Maintenance the two lamp fixing screws. C Loosen Loosen the two lamp fixing screws with the screwdriver that is supplied with the spare lamp (or your own cross head screwdriver). out the lamp. D Take Hold the lamp as shown in the illustration below and lift it up the new lamp. E Install Insert the new lamp so that the lamp fits in place correctly and once it is fully inserted, tighten the two screws. the lamp cover. F Install Slide the lamp cover and tighten the cover fixing screws.
61 Maintenance Resetting the Lamp Operating Time The projector has a built-in counter which keeps track of the lamp operating time. When the cumulative operating time reaches a certain point, it causes the replacement warning message to be displayed. Therefore, the counter needs to be reset after the lamp has been replaced with a new one. You can do this using the configuration menu. "Reset" from the configuration menu, and then B Select select "Reset Lamp Hours".
62 Maintenance Replacing the Air Filter If the air filters are broken or if the warning message reappears after they have been cleaned, they should be replaced. The air filter can be replaced even if the projector is installed on a ceiling. the new air filter. C Install Slide the air filter covers in from the outside and push them in until they click into place. PROCEDURE After you turn off the projector’s power, and the A confirmation buzzer beeps twice, disconnect the power cable. the air filter.
Checking Projected Images on an External Monitor (Monitor Output) While performing presentations and so on, you can check analogue RGB images and RGB video images from a computer being input to the "Computer/ Component Video" terminal by connecting an external monitor to this projector. Monitor port Cable provided with monitor To Monitor Out port (black) • Component video, S-Video, and component video images cannot be output to an external monitor.
Optional Accessories and Consumables 64 The following optional accessories are available for purchase if required. This list of optional accessories is current as of June, 2006. Details of accessories are subject to change without notice. Varies depending on country of purchase. Optional Accessories Soft carrying case ELPKS16B Use this case if you need to carry the projector by hand. 60" screen ELPSC07 80" screen ELPSC08 100" screen ELPSC10 Portable roll-type screens.
Screen Size and Projection Distance 65 See the following table to choose the best position for your projected image. The values are only a guide. Units: cm (in.) 4:3 Screen Size 30” 40” 50” 60” 80” 100” 120” 150” 200” 300” 61 × 46 (24 × 18) 81 × 61 (32 × 24) 100 × 76 (39 × 30) 120 × 90 (47 × 35) 160 × 120 (63 × 47) 200 × 150 (79 × 59) 240 × 180 (94 × 71) 300 × 230 (118 × 91) 410 × 300 (161 × 118) 610 × 460 (240 × 181) Units: cm (ft.
Glossary 66 The following is an explanation of some of the terms used in this guide which may be unfamiliar or which are not explained in the text of this guide itself. Further information can be obtained by referring to other commercially-available publications. Aspect ratio Color Temp. Component video Composite video Contrast Dolby Digital EMP Link 21L HDTV Interlaced Progressive Refresh rate SDTV The ratio between an image's length and its height.
Glossary Security lock Squeeze mode sRGB SVGA S-Video SXGA Sync (synchronisation) Tracking USB VGA XGA 67 A device consisting of a projector case with a hole in it that a commercially-available theft-prevention cable can be passed through in order to secure the device to a table or pillar. This projector is compatible with the Microsaver Security System manufactured by Kensington.
List of ESC/VP21 Commands Command List Cable Layouts When a power on command is sent to the projector, the power will turn on and the projector will change to warm-up mode. When the power has turned on, a colon ":" (3Ah) will be returned. When the projector executes a command, it returns a ":" and waits for the next command to be sent. If command processing terminates with an error, the projector outputs an error message and then returns the ":" code.
List of ESC/VP21 Commands USB Connection Setup In order to control the projector using ESC/VP21 commands via a USB connection, the following preparations must be carried out. PROCEDURE the USB driver (USB-COM Driver) from the A Download EPSON website to your computer. Go to http://www.epson.com and select the Support section of your local EPSON website. the downloaded USB driver onto your B Install computer. Read the instructions displayed on the download screen.
List of Supported Monitor Displays Computer/RGB Video Signal Refresh rateg (Hz) VGAg VGAEGA VESA SVGAg XGAg SXGAg SXGA SXGA MAC13" MAC16" MAC19" MAC19" MAC21" SDTVg(625i) SDTV(525i) SDTV(525p) HDTVg(750p) HDTV(1125i) 60 60/72/75/85,iMac*1 56/60/72/75/85,iMac*1 60/70/75/85,iMac*1 70 60 60 60 50 60 60 60 60 70 Component Video/RGB Video Source Resolution (dots) 640×480 640×350 640×480 800×600 1024×768 1152×864 1280×960 1280×1024 640×480 832×624 1024×768 1024×768 1152×870 720×576 720×480 640×480 1280×720 1
Specifications Product name Dimensions Panel size Display method Resolution Focus adjustment Zoom adjustment Lamp (light source) Max. audio output Speaker Power supply Multimedia Projector EMP-S4 327 (W) × 87 (H) × 247 (D) mm (not including feet) 0.5 inches Polysilicon TFT active matrix SVGAg 480,000 pixels (800 (W) × 600 (H) dots) × 3 Manual Electronic (approx. 1:1.35) UHE lamp, 170 W, Model No.: ELPLP36 1W monaural 1 100 to 240VAC 50/60Hz 2.9 to 1.
Appearance 72 3-M4×9 Centre of lens 80 87 50.1* 247 12 12 83.7 7.7 327 104.7 69.
Index A Air exhaust vent............................. 6 Air filter ......................................... 9 Air intake vent ............................... 9 Angle of tilt.................................. 71 Aspect ratio.................................. 21 Audio input .................................... 8 Auto Setup .............................. 12, 34 A/V Mute................................ 20, 36 A/V mute slide............................... 6 73 Connectors......................................
74 Index Power ON Protect........................ 26 Presentation ................................. 15 Problem Solving .......................... 43 Progressive .................................. 34 Projection..................................... 36 R Rear adjustable foot ....................... 8 Refresh Rate ................................ 38 Remote Control ...................... 10, 24 Remote control light-emitting area.............................................
75 DECLARATION of CONFORMITY According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We Located at Tel :EPSON AMERICA, INC. :3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806 :562-290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
76 All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
