Printed on 100% recycled paper. Printed in Japan 402529901E 02.06-.9A(C05) QUICK REFERENCE GUIDE Be sure to read the User's Guide thoroughly before using this projector. WARNING Never look into the lens while the projector's power is turned on.
Setting Up Adjust the distance between the projector and the screen until the desired image size is obtained. The values should be used as a guide for setting up the projector. "Screen Size and Projection Distance" in User's Guide 10.1 – 11.7 m (33.2 – 38.5 ft.) 6.7 – 7.8 (22.1 – 25.6) 3.3 – 3.9 (11.0 – 12.7) 2.7 – 3.1 (8.7 – 10.1) 2.0 – 2.3 (6.5 – 7.5) Screen size 300" 1.3 – 1.5 (4.3 –5.0) 200 (610 460 cm) (410 300) 80 (200 150) (160 120) 100 1.0 – 1.1 (3.2 – 3.
Troubleshooting Viewing the online help This projector is provided with an online help function which can be used when you have a problem using the projector. "Using the Help" in User's Guide Press on the projector's control panel. Select the item to view. Press on the projector's control panel. Projector Or press on the remote control. Accept the selected item. Press on the projector's control panel. Or press on the remote control. The help contents will then be displayed.
Projecting Remove the lens cover. Connect the power cable to the projector. "Turning On the Projector" in User's Guide Connect the other end of the power cable to an electrical outlet. The Power indicator will light orange. Turn on the power for the input source. In the case of a VCR, press the PLAY button. An image will be projected. Press on the projector's control panel or on the remote control to turn the power on. The Power indicator will start flashing green and projection will start.
Functions for Enhancing Projection Enlarging part of projected images If you press or Press , , , the cross will appear at the middle of the image being projected. or on the remote control to move the cross to the area of the image "E-Zoom" in User's Guide that is to be enlarged. Press or . Tip After enlarging the image, you can use , , and to scroll around the image. To cancel the enlargement effect, press .
Adjustment Adjusting the projection angle Use the foot adjust buttons to adjust the projection angle of the projector. While pressing the foot adjust buttons, lift up the front of the projector. "Adjusting the Screen Image" in User's Guide When the projector is tilted, it will cause keystone distortion to appear in the image, but this distortion can be corrected using the automatic keystone correction function as long as the vertical angle of tilt is within a range of approximately 15˚.
Functions for Enhancing Projection "Wireless Mouse Function" in User's Guide The following functions for enhancing the projection are explained here. Refer to the corresponding pages of the User's Guide for details on each function. Wireless mouse Selecting the colour mode E-Zoom A/V Mute Using the remote control for one-person presentations The remote control can be set so that it carries out the same operations as a computer mouse.
Adjustment Other adjustments Press the on the remote control to display the configuration menu on the screen. You can then adjust the individual brightness, contrast and sharpness settings. "Using the Configuration Menu Functions" in User's Guide Press control. on the remote The configuration menu appears. Tip Press to return to the previous menu level. Use and to select the menu item to be set, and then press . The selected sub-menu then appears.
Adjustment Other adjustments Press the on the remote control to display the configuration menu on the screen. You can then adjust the individual brightness, contrast and sharpness settings. "Using the Configuration Menu Functions" in User's Guide Press control. on the remote The configuration menu appears. Tip Press to return to the previous menu level. Use and to select the menu item to be set, and then press . The selected sub-menu then appears.
Functions for Enhancing Projection "Wireless Mouse Function" in User's Guide The following functions for enhancing the projection are explained here. Refer to the corresponding pages of the User's Guide for details on each function. Wireless mouse Selecting the colour mode E-Zoom A/V Mute Using the remote control for one-person presentations The remote control can be set so that it carries out the same operations as a computer mouse.
Adjustment Adjusting the projection angle Use the foot adjust buttons to adjust the projection angle of the projector. While pressing the foot adjust buttons, lift up the front of the projector. "Adjusting the Screen Image" in User's Guide When the projector is tilted, it will cause keystone distortion to appear in the image, but this distortion can be corrected using the automatic keystone correction function as long as the vertical angle of tilt is within a range of approximately 15˚.
Functions for Enhancing Projection Enlarging part of projected images If you press or Press , , , the cross will appear at the middle of the image being projected. or on the remote control to move the cross to the area of the image "E-Zoom" in User's Guide that is to be enlarged. Press or . Tip After enlarging the image, you can use , , and to scroll around the image. To cancel the enlargement effect, press .
Projecting Remove the lens cover. Connect the power cable to the projector. "Turning On the Projector" in User's Guide Connect the other end of the power cable to an electrical outlet. The Power indicator will light orange. Turn on the power for the input source. In the case of a VCR, press the PLAY button. An image will be projected. Press on the projector's control panel or on the remote control to turn the power on. The Power indicator will start flashing green and projection will start.
Troubleshooting Viewing the online help This projector is provided with an online help function which can be used when you have a problem using the projector. "Using the Help" in User's Guide Press on the projector's control panel. Select the item to view. Press on the projector's control panel. Projector Or press on the remote control. Accept the selected item. Press on the projector's control panel. Or press on the remote control. The help contents will then be displayed.
Setting Up Adjust the distance between the projector and the screen until the desired image size is obtained. The values should be used as a guide for setting up the projector. "Screen Size and Projection Distance" in User's Guide 10.1 – 11.7 m (33.2 – 38.5 ft.) 6.7 – 7.8 (22.1 – 25.6) 3.3 – 3.9 (11.0 – 12.7) 2.7 – 3.1 (8.7 – 10.1) 2.0 – 2.3 (6.5 – 7.5) Screen size 300" 1.3 – 1.5 (4.3 –5.0) 200 (610 460 cm) (410 300) 80 (200 150) (160 120) 100 1.0 – 1.1 (3.2 – 3.
Printed on 100% recycled paper. Printed in Japan 402529901E 02.06-.9A(C05) QUICK REFERENCE GUIDE Be sure to read the User's Guide thoroughly before using this projector. WARNING Never look into the lens while the projector's power is turned on.
