User`s guide

Presenting Through a Wireless Network 87
7. Choose one of the Destination Address fields, then enter the
e-mail address and the contents of the message that you will
receive when an problem or warning occurs. You can register up
to three addresses. You can enter up to 32 alphanumeric
characters for the e-mail address.
8. Select problems or warnings to be notified about by mail.
When the selected problem or warning occurs, an e-mail message is
sent to the specified notification addresses. The subject line of the
e-mail is
EPSON Projector. The e-mail includes the following
information:
■ Line 1: The name of the projector where the problem has
occurred
■ Line 2: The IP address of the projector where the problem has
occurred
■ Line 3: Details of the problem
note
If a critical problem develops
with a projector which
causes it to suddenly stop
working, it may not be
possible for the projector to
send a message.
If Standby Mode is set to
Network ON in the
Extended menu, the
projector can still be
monitored even if the
projector is in standby mode
(when the power is off).