User`s guide

Presenting Through a Wireless Network 85
You see the following screen:
8. Do one of the following:
■ If your network assigns addresses automatically, turn on the
DHCP setting.
■ If your network does not assign addresses automatically, turn
off
DHCP and enter the projector’s IP Address, Subnet
Mask
, Gateway Address, and DNS Servers, as needed.
To enter numbers, use the pointer button on the remote
control to highlight the number you want to input, then press
the
Enter button. When you’re finished changing an address
in the network menu, highlight
Return, then press the Enter
button.
When you’re done making all necessary changes, press
Menu to exit
the menu system.
To connect to the projector with NS Connection using the Quick
Connection mode, see page 73. To connect to the projector using
Advanced Connection mode, see page 77.
note
If you’re a network
administrator, you can use
the SNMP option to enter a
trap IP address. This lets you
receive trap alerts for the
projectors you’re monitoring.
If you have HP OpenView,
a plug-in will be available
to allow you to manage your
projectors in HP OpenView.
Check with your dealer or
Epson for availability.