User`s guide

116 Fine-Tuning the Projector
■ Pointer Shape
Lets you choose from three alternative pointer shapes. See page 34
for more information.
■ Brightness Control
Lets you select from two levels of brightness. The Low setting
reduces power consumption and noise, and extends the lamp’s
operating life.
■ Volume
Raises or lowers the volume of the projector’s speaker.
■ EasyMP Audio Out
Lets you output sound from EasyMP scenarios (.wav files) or
MPEG files to external speakers with built-in amplifiers. Connect
the speakers as shown on page 45.
Using the Projector Security Features
To prevent unauthorized use of the projector, you can do the
following:
■ Assign a password; this can be disabled for a set period if you want
to loan the projector to someone.
■ Create an identifying user logo that is displayed at startup and/or
when the
A/V Mute button is pressed. See page 119.
■ Disable the projector’s buttons; this is useful, for example, if
you’re projecting in a classroom and you want to ensure that no
one touches the projector’s buttons while you’re using the remote
control. See page 121.
■ Lock the network configuration settings. See page 118.
If you create a user’s logo for the projector, you can set up the logo so
it is displayed as the startup screen and/or AV/Mute screen.
Unauthorized users cannot turn it off or change it. This feature is
intended to discourage theft and provides a way to identify the
projector should it be stolen.
note
You can also adjust the
volume using the remote
control.