Epson PowerLite 1705c/1715c Multimedia Projector ® ® User’s Guide
Important Safety Information WARNING: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you. Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
Contents Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using Your Documentation . . . . . . . . . . . . . . . . . . . . . . . . . 10 Getting More Information . . . . . . . . . . . . . . . . . . . . . . . 10 Registration and Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Unpacking the Projector. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Additional Components. . . . . . . . . . . . . . . . . . . . . . . . . 13 Optional Accessories . . . .
2 Using the Remote Control . . . . . . . . . . . . . . . . . . . 27 Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Replacing the Batteries. . . . . . . . . . . . . . . . . . . . . . . . . . 28 Controlling the Picture and Sound. . . . . . . . . . . . . . . . . . . . 29 Switching Between Picture Sources . . . . . . . . . . . . . . . . 29 Turning Off the Picture and Sound . . . . . . . . . . . . . . . . 30 Stopping Action. . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Presenting Through a Wireless Network . . . . 47 Starting EasyMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Configuring Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Configuring the Connection. . . . . . . . . . . . . . . . . . . . . . . . . 50 Using Ad Hoc Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Using Access Point Mode. . . . . . . . . . . . . . . . . . . . . . . . 57 Using Wireless Security Options. . . . . . . . . . . . . . . .
6 Fine-Tuning the Projector. . . . . . . . . . . . . . . . . . 109 Using the Menu System . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 Restoring the Default Settings . . . . . . . . . . . . . . . . . . . 111 Adjusting the Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Adjusting Signal Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Customizing Projector Features . . . . . . . . . . . . . . . . . . . . . 115 Using the Projector Security Features . . . . .
9 Solving Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Using On-Screen Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 Checking Projector Status. . . . . . . . . . . . . . . . . . . . . . . . . . 149 What To Do When the Lights Flash . . . . . . . . . . . . . . 149 Viewing Lamp Usage and Other Information . . . . . . . 151 Solving Projector Operation Problems . . . . . . . . . . . . . . . . 151 Solving Problems with the Image or Sound . . . . . . . . . . . .
- Welcome The Epson PowerLite ® ® 1705c/1715c is an easy-to-use projector that weighs less than 4 pounds. The projector offers up to 2700 lumens (1715c) or 2200 lumens (1705c) of brightness. You can connect it to a wide range of computers and video sources, or you can project from a USB storage device, or over an 802.11g, 802.11b, or 802.11a wireless network.
Using Your Documentation This book contains all the information you need to set up and use your projector. Please follow these guidelines as you read through it: ■ Warnings must be followed carefully to avoid bodily injury. ■ Cautions must be observed to avoid damage to your equipment. ■ Notes contain important information about your projector. ■ Tips contain additional projection hints.
■ presentersonline.com Includes a library of articles covering presentation tips, tricks, and technology. The site provides templates, clip art and sound clips, as well as Presenters Services to use on the road. Even more resources and services are available if you register to join the Presenters Club®—and it’s free.
Unpacking the Projector After unpacking the projector, make sure you have all the parts shown below: Projector with 802.11g/b/a wireless adapter Audio adapter Power cable PDF manual and registration CD-ROM Remote control and 2 AAA batteries EasyMP software CD-ROM USB cable VGA computer cable Carrying case Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location.
Additional Components Depending on how you plan to use the projector, you may need additional components: ■ To receive an S-Video signal, you’ll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 13. ■ To receive a component video signal from a VCR or other video device, you’ll need an HD15 to component video cable. You can purchase one from Epson; see below.
You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
1 Displaying and Adjusting the Image W hether you’re presenting from a computer or video equipment, you need to follow some basic steps to display your image on the screen.
Positioning the Projector note You can mount the projector on the ceiling, or place it behind a translucent screen for rear projection. See page 167 for details. If the projector isn’t already installed in the room you’re using, you’ll probably want to place it on a table in front of the screen, as shown. This lets you stand in the front of the room, face the audience, and remain close enough to the equipment to be able to control it.
Ideally, you should place the projector directly in front of the center of the screen, facing it toward the screen squarely. The base of the lens should be at about the level of the bottom of the screen. note After positioning the projector, you may want to connect a Kensington MicroSaver® anti-theft device to the lock port on the projector. You can purchase this from Epson; see page 13.
Follow these steps to turn on the projector: note To shut down the projector, see page 25. Shutting down the projector correctly prevents premature lamp failure and possible damage from overheating. 1. Open the A/V Mute slide (lens cover). 2. Plug one end of the power cable into the projector, and the other end into an electrical outlet. The Power light turns orange.
3. Press the red P Power button on the remote control or on top of the projector. The projector beeps once and the Power light flashes green as the projector warms up, then an image begins to appear. When the Power light stops flashing and remains green, the projector is ready for use. 4. If you’ve connected a Windows-based computer to the projector, you may see a New Hardware Wizard screen saying your computer has found a plug-and-play monitor; if so, click Cancel.
Troubleshooting Display Problems Follow these guidelines if you’re having trouble displaying an image. You Can’t Project an Image If you don’t see the image you are trying to project, try the following: ■ Make sure the cables are connected correctly, as described beginning on page 35. ■ Make sure the Power light is green and not flashing and the A/V Mute slide is open.
■ If the function key doesn’t permit you to display simultaneously on both screens, you should check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.
Adjusting the Image Once you see your image, you need to make certain adjustments: ■ If the image is too high or too low, you can reposition it. See below. ■ To focus or zoom your image, see page 23. ■ If the image isn’t square, see page 23. ■ If a computer image displays incorrectly, see page 25. ■ If you need to fine-tune the image and/or sound, see Chapter 6. Adjusting the Height of Your Image If the image is too low on the screen, you can use the front adjustable foot to raise it. 1.
Focusing and Zooming Your Image Turn the focus ring on the projector to sharpen the image. Turn the zoom ring on the projector to reduce or enlarge the image. Focus Zoom If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoom buttons on the remote control to zoom in on a portion of the image. See page 31 for instructions.
Using Keystone Correction To adjust your image when it is wider on the top or bottom, do the following: ■ Press one of the two triangular buttons on the projector’s control panel, as shown below. Continue pressing the button until you are satisfied with the shape of the image. ■ Or press the Menu button on the remote control or projector, select the Setting menu, and press Enter. note The image will be slightly smaller after adjusting.
Correcting Computer Images If you’re connected to a computer and the image doesn’t look right, press the Auto button on the remote control or the Enter button on the projector. This automatically resets the projector’s tracking, sync, resolution, and position settings. note You must be projecting an image for this button to have any effect. The Auto button works only with computer images projected through the VGA port.
note You can set the projector to automatically turn off the projector lamp and enter “sleep mode” when it has not received any signals for 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. If you want to start projecting again, press the P Power button. If you are done using the projector, unplug the power cord. To enable sleep mode, see page 122. 3. Press the P Power button again. The lamp turns off.
1 Using the Remote Control T he projector includes a number of tools to enhance your presentation. All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 20 feet away. note For information and resources to help you give the most professional presentation, be sure to visit presentersonline.com. You can use the remote control to adjust the picture and sound (page 29) or as a pointer to highlight your presentation (page 34).
note If a button is pressed longer than 30 seconds, the remote control stops operating to conserve power. When you release the button, normal operation resumes. Using the Remote Control Follow these tips for using the remote control: ■ Point the remote control at the front of the projector or at the screen. ■ Stand within 20 feet of the projector. ■ Avoid using the remote under bright fluorescent lamps or in direct sunlight, or the projector may not respond properly.
Controlling the Picture and Sound You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, and adjust the volume.
Turning Off the Picture and Sound You can use the A/V Mute button on the remote control to turn off the image and sound. This feature is useful if you want to temporarily redirect your audience’s attention. ■ To turn off the picture and sound, press the A/V Mute button. The screen turns black. ■ To turn the image and sound back on, press the button again. You can have the screen turn blue when you press the A/V Mute button.
Zooming Part of Your Image You can zoom in on a portion of the image using the E-Zoom buttons on the remote control. 1. Press the E-Zoom button on the remote control. You see a crosshair indicating the center of the zoom-in area. 2. Use the pointer button to position the crosshair. button to enlarge the selected 3. Continue pressing the E-Zoom area up to 4 times. 4. While the image is enlarged, you can: ■ Use the pointer button to move around the screen. ■ Press the E-Zoom button to zoom out. 5.
Resizing Video Images You can use the Resize button on the remote control to adjust how an image fits into the display area. For video images, press Resize to switch the aspect ratio between 4:3 and 16:9, (and Normal for computer images). This lets you play certain digital video images or movies recorded on certain DVDs in 16:9 widescreen format. For computer images, resizing is normally unnecessary, since the projector automatically resizes the image to make the best use of the display area.
Operating Your Computer with the Remote Control If you connect a computer to the projector with a USB cable, as described on page 37, then select Link21L for the USB Type B setting in the Extended menu (see page 122), you can use the remote control in place of your computer’s mouse. This gives you more flexibility when delivering slideshow-style presentations, since you won’t have to stand next to the computer to change slides. ■ Use the Up and slideshow.
Highlighting Your Presentation You can display a pointer to call out important information on the screen. If you want to customize the pointer tool, you can choose from three alternative shapes. Using the Pointer Tool 1. To activate the pointer tool, press the Pointer button on the remote control. A pointer appears on the screen. Pointer If you prefer to use a different style of pointer, see the instructions in the next section. 2.
1 Connecting to Computers, Cameras, and Other Equipment T his chapter tells you how to connect the projector to a notebook or desktop computer, and/or to video equipment, such as a VCR, DVD player, or video camera. You can also connect the projector to a USB storage device, digital camera, or external speakers.
note If you connect a Windowsbased computer to the projector, you may see a New Hardware Wizard saying your computer has found a plug-and-play monitor; if so, click Cancel. note For newer notebooks with DVI connectors, see your computer’s documentation to see how to use a DVI to VGA adapter (often included with the computer) to connect to the VGA computer port.
3. When you’ve finished making any connections, see page 17 for instructions on turning on the projector and adjusting the image. Connecting the Cable for Remote Mouse Control If you’ve connected a computer as described in this chapter (using the Computer/Component Video port) and set the USB Type B setting under the projector’s Extended menu to Link21L (see page 122), you can use the projector’s remote control as a wireless mouse.
4. If necessary, configure your computer to work with an external USB mouse. See your computer documentation for details. Connecting to Video Equipment RCA connector (composite video) S-Video connector You can connect several video sources to the projector at the same time. Before starting, look at your video equipment to determine its available video output connections: ■ If your video player has a yellow RCA-style video output connector, see “Connecting a Composite Video Source” on page 39.
Connecting a Composite Video Source 1. Locate an RCA-style video cable (one is usually provided with your video equipment or you can purchase one from an electronics dealer). 2. Connect the cable to the yellow video output connector on your player and the yellow Video connector on the projector: 3. If you want to play sound through the projector, see page 44 for instructions on connecting audio cables. 4.
Connecting an S-Video Source 1. Locate an S-Video cable (one is usually provided with your video equipment or you can purchase one from Epson; see page 13). 2. Connect the cable to the S-Video connector on your player and the S-Video connector on the projector: 3. If you want to play sound through the projector, see page 44 for instructions on connecting audio cables. 4.
Connecting a Component Video Source You will need a component-to-VGA video cable or a component video-to-VGA adapter for this connection. You can order this cable (ELPKC19) from Epson; see page 14 for more information. 1. Locate a component-to-VGA video cable or adapter. 2. Connect the cable to your player and the blue Computer/Component Video connector on the projector. note Be sure your video player is not an RGB video source. If you select the wrong source, image quality may suffer.
Connecting an RGB Video Source note 1. Locate the VGA computer cable provided with the projector. Be sure your video player is 2. Connect the cable to the video port on your player and the Computer/Component port on the projector. not a component video source. If you select the wrong source, image quality may suffer. Check your video player’s documentation. 3. If you want to play sound through the projector, see page 44 for instructions on connecting audio cables. 4.
Connecting to a Digital Camera or Other Device You can connect your digital camera, USB flash memory drive, USB hard drive, or multimedia storage viewer, such as the Epson P-4000 or iPod® photo. Use the USB cable specified for your device. Then you can use your device’s slideshow function or the projector’s EasyMP PC Free feature (see page 89) to present images. 1. Make sure there is no card inserted in the projector’s card slot. 2.
Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. To play sound through the projector, follow these steps: 1. Locate the appropriate cable and connect it to the Audio jack on the projector. ■ If you have a computer connected to the blue Computer/ Component Video port, use a stereo mini-jack cable.
Connecting External Speakers When you use EasyMP, you can output the sound to external speakers with built-in amplifiers. First, you need to use the Settings menu to set the EasyMP Audio Out option to External. See page 116 for instructions. To connect speakers to the projector, follow these steps: 1. Locate the appropriate cable to connect your speakers.
Connecting to Computers, Cameras, and Other Equipment
1l Presenting Through a Wireless Network T his chapter tells you how to send pictures to the projector through a wireless network. Using EMP NS Connection, you can project images shown on your computer screen—including text and graphics—directly to your audience. Because images are displayed in real-time, any changes you make on your PC or notebook are automatically mirrored on the screen.
Starting EasyMP note Only the Epson 802.11g/b/a module is guaranteed to work. Other brands may not be compatible. If you see a message asking you to insert a LAN or memory card, check to make sure your 802.11 g/b/a module is properly inserted. Before connecting to the projector, you have to switch it to EasyMP mode. Follow these steps: 1. Point the remote control at the projector and press the P Power button. 2. Press the EasyMP button on the remote control to select EasyMP as the source.
Configuring Basic Settings You can give your projector a unique name, enable a projector keyword, or create a password for controlling the projector over the Web. 1. Press the Menu button, then choose Network and press Enter. 2. Choose To Network Configuration and press Enter. 3. Choose Basic and press Enter. You see the following screen: 4. Make sure the projector has a unique name, so you can identify it when connecting to it from your computer.
5. Press the pointer button to select individual letters; then press Enter to input a character. To add a blank space or to navigate backward and forward through the input text, highlight the arrows and press Enter. To toggle symbol settings or capital letters, highlight the option and press Enter. When you’re done, highlight Finish and press Enter. 6.
Macintosh with an AirPort® or AirPort Extreme card. When you connect with this mode, any connection to other wireless networks is broken; you can connect to the projector only. ■ Access Point mode (infrastructure mode) lets multiple computers access the projector at the same time and easily trade off control over the projector. To use Access Point mode, you need a wireless (802.11g , 802.11b, or 802.
4. Make sure Quick is selected for the Connection mode. If not, use the pointer button on the remote control to highlight Quick, then press Enter to select it. 5. If your network is using 802.11a, use the pointer button on the remote control to highlight 802.11a, then press Enter to select it. 6.
Configuring the Network Settings for Windows Before connecting to the projector, you need to make sure the settings for your notebook’s or PC’s network card match the settings you entered for the projector. 1. Access your wireless network Properties window. For example, in Windows XP you would click Start > Control Panel > Network and Internet Connections. Then click the Network Connections icon.
2. Right-click the Wireless Network Connection icon and select Properties. You see a screen similar to this: Click here 3. Click the Configure button. 4. Click the Advanced tab.
5. Check your wireless card or adapter device settings. (Depending on the type of card or adapter you’re using, some of the settings may be different than those listed here.) ■ Set the Network Type to 802.11 Ad Hoc. ■ Set the SSID to match the name you assigned to the projector’s ESSID. ■ Make sure Encryption is Disabled. 6. Click the General tab and make sure that your wireless card or adapter is enabled. 7. When you’re done, click OK to close the Properties dialog box.
3. Make sure Location is set to Automatic. Select Automatic note: If you don’t need the other network port configurations, disable them by deselecting their checkboxes. When you connect in Ad Hoc mode, your computer is disconnected from any other wireless networks. If you need to remain connected to your wireless network, use Access Point mode, as described on page 57. Also, make sure you reconnect to your original wireless network when you are done using the projector.
Using Access Point Mode To use Access Point (infrastructure) mode, first adjust your projector and wireless access point or AirPort base station settings as described in this section. Configuring the Projector 1. Press the Menu button, then choose Network and press Enter. 2. Choose Wireless LAN and press Enter. You see this screen: 3. Make sure Advanced is selected for the Connection mode. If not, use the pointer button on the remote control to highlight Advanced, then press Enter to select it. 4.
your AirPort network may be different from that of your AirPort base station; select your base station in the AirPort Admin utility and click Configure to check the name of your network.) Highlight the ESSID text box, press Enter, and enter a name: Press the pointer button to select individual letters; then press Enter to input a character. To add a blank space or to navigate backward and forward through the input text, highlight the arrows and press Enter.
7. When you’re done making these settings, highlight the Return button at the top of the screen, then press Enter. Choose Setup Complete and press Enter, then choose Yes and press Enter to save your settings and return to the main EasyMP screen. Now you’re ready to set up your computer for wireless projecting. Go to “Configuring the Network Settings for Windows” below, or go to “Setting Up Your Mac for Access Point Mode” on page 65.
2. Right-click the Wireless Network Connection icon and select Properties. You see a screen similar to this: Click here 3. Click the Configure button. 4. Click the Advanced tab.
5. Check your wireless card’s or adapter’s device settings. (Depending on the type of card or adapter you’re using, some of the settings may be different than those listed here.) ■ Set the Network Type to Infrastructure. ■ Set the SSID to match the name assigned to the access point (which should also be the projector’s ESSID). ■ Make sure Encryption is Disabled if you have not set up encryption on the projector. 6. Click the General tab and make sure that your wireless card or adapter is enabled. 7.
9. Select Internet Protocol and click the Properties button. You see this screen: note For specific details about your network, please consult your network administrator. 10. If your access point uses DHCP, select Obtain an IP address automatically. Otherwise select Use the following IP address and enter the required information: ■ IP address: Type in the IP address you want to assign to the computer. It must be formatted like other addresses on the network. The last section must be unique.
You see a screen like this: 13. Verify that you’ve enabled your computer’s connection to the access point. It should be listed with the small icon next to it, indicating a connection. If it’s not listed, click Configure and type the name of your access point. 14. When you’re done making settings, click OK to close the dialog box. Now you’re ready to connect to the projector. See “Projecting Over a Network” on page 73.
note If you cannot identify the gateway address using this Windows utility, use the administrator’s utility software that came with your access point. Checking the Gateway IP Address on Windows If you’re entering IP addresses manually and need to find out the gateway IP address (the IP address of your access point), make sure the wireless connection to the access point is currently active, as described in the previous section. Then follow these steps: 1. Access your wireless network Properties window.
3. Click the Support tab. The gateway’s IP address is listed as shown: Gateway address Setting Up Your Mac for Access Point Mode Your AirPort software is automatically configured to allow your Mac to detect Access Point networks. Typically, you only need to select your AirPort network name from the AirPort status menu on the Mac menu bar. If you’re having problems connecting to the projector, follow these steps: 1. From the Apple pull-down menu, select System Preferences. 2. Click the Network icon.
3. Make sure Location is set to Automatic. note If you don’t need the other network ports, disable them by deselecting their checkboxes. If more than one network port is enabled, the projector software warns you to turn off AirPort when you first connect the projector. Disregard this message. Your AirPort network and base station names may be different. To check or change your AirPort network name, start the AirPort Admin utility, select your base station, and click Configure.
10. Click the AirPort icon on the menu bar at the top of the Macintosh desktop. You see the AirPort status menu: 11. Check to make sure AirPort is turned on. 12. Select the name of your AirPort network. Using Wireless Security Options You can use the following security options when connecting to the projector wirelessly: WEP encryption, WPA security, EAP-TLS certificate validation, or LEAP, EAP, or PEAP authentication.
You see the following screen: 4. Press Enter to show the menu, then highlight WEP and press Enter. 5. For the WEP encryption setting, highlight 128 Bit or 64 Bit and press Enter. 6. For Format, highlight HEX to enable hexadecimal input or ASCII to enable text input, then press Enter. note Text input for WEP encryption varies with different access points; check with your network administrator. Try ASCII first. If that doesn’t work, try Text2 and then Text3. 68 7.
8. Check with your network administrator for directions on entering a key for your network, and follow these general guidelines: ■ For 128 bit WEP encryption with hexadecimal input, enter 26 characters, from 0 to 9 and from A to F. ■ For 64 bit WEP encryption with hexadecimal input, enter 10 characters, from 0 to 9 and from A to F. ■ For 128 bit WEP encryption with ASCII or text input, enter 13 alphanumeric characters.
4. Press Enter to show the menu, then choose WPA-PSK (TKIP) or WPA-PSK (AES) and press Enter. Highlight the PSK (pre-shared key) text box and press Enter. Press the pointer button to select individual letters; then press Enter to input a character. To add a blank space or to navigate backward and forward through the input text, highlight the arrows and press Enter. To toggle symbol settings or capital letters, highlight the option and press Enter. When you’re done, highlight Finish and press Enter. 5.
You see the following screen: 4. Press Enter to show the menu, then choose EAP-TTLS/MD5, EAP-TTLS/MS-CHAPv2, LEAP, PEAP/MS-CHAPv2, or EAP-FAST/GTC and press Enter. 5. Enter the user name and password that match the settings on your authentication server: Highlight the User name text box and press Enter. Press the pointer button to select individual letters; then press Enter to input a character.
6. When you’re done making these settings, highlight the Return button at the top of the screen, then press Enter. Choose Setup Complete and press Enter, then choose Yes and press Enter to save your settings and return to the main EasyMP screen. Enabling EAP-TLS Certificate Validation 1. Press Menu. Highlight Network and then press Enter. 2. Choose To Network Configuration and press Enter. 3. Highlight Security, then press Enter. You see the following screen: 4.
Projecting Over a Network Once you’ve started EasyMP and set up your projector and computer in either Ad Hoc (Quick) mode or Access Point (Advanced) mode, or in the optional wired LAN mode, as described on page 84, follow these steps to start NS Connection and project over the network. 1. Make sure you’ve set up your projector (see page 48). 2. Windows: Select EMP NS Connection from the Start menu. Mac OS X: Double-click the EMP NS Connection icon in your Applications folder. 3.
You see the screen below. (If you have previously started NS Connection, this may be the first screen you see.) note If a projector is in use and is “locked,” you won’t be able to select it. To lock the projector from connection by other users while you are connected, click the Disable interrupt connection checkbox. De-select it to disable the lock and allow connection by other users.
6. If you set up the projector to prompt you for a keyword before connecting, you see a screen like this one: Enter keyword Type in the four-digit number displayed on the EasyMP Network screen and click OK. 7. Once the connection is established, you see your computer’s image transmitted to the screen, and a floating control bar on your computer desktop: Windows Macintosh 8. If necessary, you can drag the control bar out of the way on your screen. 9.
2. Make sure you’re trying to connect to the right network. In Windows, verify that you’ve enabled your computer’s connection to the access point or that your wireless card or adapter is enabled, and that its SSID matches the projector’s ESSID. In Mac OS X, check the AirPort status menu (click the AirPort icon on your menu bar) to make sure AirPort is turned on and the projector’s ESSID or your AirPort network is selected. note The AirPort network name may be different than the AirPort base station name.
Starts Presentation Mode for the selected projector. In Presentation Mode, only the PowerPoint slide show images are projected by the projector. Displays the Projector control screen, which allows you to enable A/V Mute, switch the PC source, or switch the video source. For projecting movie files on your computer. Allows you to set up multi-screen mode and see a preview of how the images will appear on each screen. Displays the projector settings dialog box. Disconnects the connection to the projector.
2. Enter the IP address or the projector name for the projector you want to connect to, and click OK. The Projector is added to the EMP NS Connection screen. If the search fails to find a projector with the specified IP address, the searching icon turns into a question mark. If this happens, run EasyMP on your projector (see page 48) to check the projector’s IP address, then repeat this step. 3. Click the projector you want to connect to and click the Connect button.
■ Firewall Prevents unauthorized computer access by closing ports that are not used.The security functions that can be used with this projector vary depending on the connection mode of the wireless LAN. Use the firewall function provided with your OS.
3. Select the Encrypt communications checkbox. 4. Click OK. Enabling Network Security Options You need to enable network security including WEP, WPA, EAP, LEAP, or PEAP, or firewall settings on your network and on the projector (see page 67). For network setting details, follow the directions from your network administrator. If using EAP, you need to make settings at the projector that match the authentication server settings. Check with your network administrator for details on RADIUS settings.
Multi-screen Projection When using Multi-screen display, you can set each projector to display a section of the screen or image, to create a single image spanning a large area. Here are some examples: note For a Mac, you have to connect a monitor to the computer and use the multi-screen display function. For Windows, even if a monitor is not connected, you can set a virtual display by installing the virtual display driver prepared in EMP NS Connection.
2. Click Display properties. 3. Drag the monitor icons to arrange the positions of the displays. 4. Close the Display Preferences (Windows) or System Preferences (Mac), when you are done arranging the display numbers.
5. To allocate projectors to each display, choose a number from the menu under Display. 6. Click the Connect button when you are ready to project the image. Removing the Wireless 802.11g/b/a Module Follow these steps to remove the card from your projector. 1. If you’re running NS Connection, click Disconnect on the control bar.
caution Never remove the module while the indicator light is green or when projecting wirelessly. You may damage the module or lose data. 2. Check the access light to make sure it isn’t flashing. Then pull the module off of the projector. Connecting to a Wired Network With the optional Ethernet unit, you can connect the projector to your network and configure it with an IP address. note Only the Epson Ethernet unit is guaranteed to work. Other brands may not be compatible.
You see the following screen: note 8. Do one of the following: ■ If your network assigns addresses automatically, turn on the DHCP setting. ■ If your network does not assign addresses automatically, turn off DHCP and enter the projector’s IP Address, Subnet Mask, Gateway Address, and DNS Servers, as needed. To enter numbers, use the pointer button on the remote control to highlight the number you want to input, then press the Enter button.
Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. 1. Press the Menu button on the remote control, select the Network menu, then press Enter. 2. Choose To Network Configuration and press Enter. 3. Choose Mail, then press Enter. You see the following screen: 4. Highlight On to receive email notifications, then press Enter. 5. Enter the IP address for the SMTP server for the projector.
7. Choose one of the Destination Address fields, then enter the e-mail address and the contents of the message that you will receive when an problem or warning occurs. You can register up to three addresses. You can enter up to 32 alphanumeric characters for the e-mail address. 8. Select problems or warnings to be notified about by mail. When the selected problem or warning occurs, an e-mail message is sent to the specified notification addresses. The subject line of the e-mail is EPSON Projector.
Presenting Through a Wireless Network
1 Presenting from a Digital Camera or External Drive T he projector’s EasyMP PC Free feature lets you give presentations from a drive or a digital camera connected to the projector via USB. You can play movies, display graphics, or play a scenario, a format that lets you create your own slideshow using PowerPoint files, JPG image files, and BMP graphics files. This chapter covers the following: note To create a scenario, you need a USB drive to connect to your computer.
Creating a Slideshow on the Fly If you have a folder containing an assortment of images, you can display them as a slideshow. Displaying the Slideshow First make sure the images are stored in a folder on the USB drive. Then follow these steps: 1. Use the pointer button on the remote control to highlight the drive containing your images and press Enter. 2. Use the pointer button on the remote control to highlight the folder containing your images and press Enter.
3. From the drop-down menu, use the pointer to select Play Slideshow and press Enter. The images contained in the folder are presented as a slideshow. Use the remote control to run the slideshow as described in the next section. Controlling Your Slideshow While your slideshow is running, use the remote control as follows: ■ Press Enter or Page down to display the next slide or image, or to begin playing a movie. ■ Press Page up to display the previous slide or image, or to replay a movie.
You see this screen: 3. Use the pointer button to select from the following settings. After making a selection, press Enter to save the change. ■ Mode switching Lets you choose the mode to use when presenting slideshows, movies, or images, or editing a scenario on the projector. In Guide mode, a drop-down menu appears whenever you select an item and press Enter.
■ Screen switching time Sets the display time for each image. Choose No if you want to change slides manually. ■ Effect Lets you choose from various transitions between slides, such as Dissolve or Wipe. 4. When you’re done, highlight OK and press Enter. Your changes are permanently saved with each folder—even if you turn off the projector or disconnect the drive or camera.
note Make sure your camera shows up on your desktop as a drive letter. If it does, it is probably a USB mounted device and will work with the projector software. The EasyMP software does not support TWAIN-compliant digital cameras. 9. Position the cursor on the image file you want to project and press Enter. 10. Select View Image. The image is projected on the screen. If you want, you can press a side of the pointer button to rotate the image while you’re viewing it.
To stop viewing images, press the Esc button on the remote control, then select Exit and press Enter. note Creating a Scenario If you exit the PC Free mode on the projector, disconnect and re-connect your USB device before starting again. A scenario is a combination of images, movies, and/or audio files that you can present from a USB drive. The easiest way to create a scenario is to drag and drop a PowerPoint file on the EMP SlideMaker2 icon on your desktop.
6. When the scenario is done, click Close. You see the following message: 7. Connect a USB device and browse to the drive, then click OK to transfer your scenario file. Creating a Scenario from Scratch Use this method when you want to create a scenario from a selection of PowerPoint slides, graphics, or movie files. You’ll need to set up your scenario file and folder, build the scenario, set up transitions, and check the scenario. Setting Up the Scenario File and Folder 1.
You see the EMP SlideMaker 2 screen: File-type selection box Scenario window Folders window File window Thumbnail window 2. Choose New from the File menu.
note 3. Type a name for your scenario file and folder that’s easy to remember, using up to eight capital letters and numbers. Then select from the following options: The scenario name you enter is also the name of the folder for your scenario on your hard drive. ■ The default location for the scenario file and folder is in the \Program Files\EMP SlideMaker2 folder. Click Browse to choose a new location. ■ Click Configure BGM(W) to play an audio file during the scenario.
Follow these steps: 1. Use the navigation tools on the left side of the EMP SlideMaker 2 screen to locate the files you want to include in your scenario. PowerPoint, JPEG, bitmap, and movie files appear as icons in the file window. Click to see preview Thumbnail preview 2. Click the icon for each file that you want to preview. The preview appears in the thumbnail preview window. If you click a PowerPoint icon, thumbnail images are generated for all the slides in the PowerPoint file.
3. Drag and drop the files you want to include in your scenario from either the file window or thumbnail window into the scenario window. (You can also double-click a thumbnail to add the file to the scenario.) Scenario Cell Check a slide’s animation effects here note Transition effects created in PowerPoint look smoother than those you add with EMP SlideMaker 2. To include a whole PowerPoint file (instead of individual slides), drag the PowerPoint icon itself into the scenario window.
6. When you’re done, click the Save button or choose Save from the File menu. Then see page 104 to transfer the scenario to your USB drive. Setting Up Transitions EMP SlideMaker 2 lets you set your slides to advance manually or automatically after a specified period of time. You can also choose from a variety of transition effects between slides. 1. Click the cell or cells for which you want to set up in the scenario window. To select more than one cell, hold down the Ctrl key while you click.
3. Click Cell Properties. You see this dialog box: Click to change slides manually Click to change slides automatically Select transition effects 4. Choose how you want to advance to the next cell. note Transition effects look smoother when you create them in the PowerPoint file itself and use that file to create a scenario. ■ If you want to change slides manually using the remote control, select On mouse click.
Checking Your Scenario You can play your scenario before you transfer it to a USB drive to make sure it looks and sounds the way you want it to. 1. Use the navigation tools in the folders window to locate the scenario file you want to review. Click the file, then select File > Open to open the scenario. 2. Click Scenario Option(s) > Scenario Preview. The Scenario Preview window displays. If the scenario is set to advance automatically (see page 102), it begins to play.
Transferring Your Scenario to a USB Drive note Don’t use Windows to copy the scenario to your USB drive, or it may not play properly. You must connect the USB drive before you select Send Scenario from the Scenario Option(s) menu. If you don’t, you won’t be able to see the drive in the drive selection window. If this happens, close and restart EMP SlideMaker 2. Once your scenario is saved, you can transfer it to a USB drive.
7. Do one of the following: ■ If you don’t want the scenario to run automatically, click Cancel. Skip to step 11 to remove the drive and insert it in the projector. ■ If you want it to run automatically, click OK and continue with the following instructions. You see the Edit Autorun window: 8. To set a scenario to run automatically, select it from the list on the left side of the screen and use the arrow button to move it to the list on the right. 9.
Presenting Scenarios Before you begin, connect the USB drive containing the scenario to your projector, as described on page 89. The follow these steps to present your scenario: 1. Turn on the projector, if it’s not already on. ■ If your scenario is set to autorun, it will start as soon as the projector warms up. ■ If your scenario is not set to autorun, you need to start it manually. Continue with the following steps. 2. Select EasyMP as the source by pressing the EasyMP button on the remote control.
Controlling Your Scenario While your scenario is running, use the remote control as follows: ■ Press Enter or Page down to display the next slide or image, or to begin playing a movie. ■ Press Page up to display the previous slide or image, or to replay a movie. note ■ Press the appropriate side of the slide or image on the screen. ■ To exit the scenario at any point, press the Esc button. Press the Enter button to confirm that you want to exit.
Supported File Formats The following file types may be projected from a digital camera, external hard drive, or flash memory drive: File Type Extension Notes Scenario .sit These are scenario files created using the EMP SlideMaker 2 program that is included with the projector. Graphics .bmp Images with a resolution greater than 1024 × 768 cannot be projected. .gif Images with a resolution greater than 1024 × 768 cannot be projected. .
1 Fine-Tuning the Projector Y ou can use the projector’s on-screen menus to adjust the image, sound, and other features.
Using the Menu System You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps: 1. To display the menu screen, press the Menu button on the remote control or on the projector. You see a menu screen similar to the one below: Options Menu list The menus are listed on the left and the options available for the highlighted menu are shown on the right. 2.
4. After highlighting the option you want to adjust, use the pointer button to change the setting. In some cases, you may have to press the Enter button to view a sub-screen for changing the setting. ■ Press the left or right side of the a slider bar. pointer button to adjust ■ To select from two or more settings, use the pointer button to highlight the desired setting and press Enter. 5.
Adjusting the Image You can use the Image menu to adjust the brightness, sharpness, color, tint, and contrast. 1. Press the Menu button on the projector or remote control and select the Image menu. You see the Image menu screen. 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Color Mode Lets you quickly adjust the color and brightness for various environments. Use either the remote control or the Color Mode setting in the Image menu.
Blackboard: For projecting accurate colors on a green chalkboard (adjusts the white point). note The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Brightness Control in the Setting menu, then choose High or Low (the default setting is High). Customized: For manual color adjustment. (See below.) ■ Brightness Lightens or darkens the overall image. ■ Contrast Adjusts the difference between light and dark areas.
You see a screen similar to one of those below. (The settings will be different depending on the source you are projecting from.) Computer/RGB Video Component Video Composite Video/S-Video 2. Use the pointer button to highlight the desired option, then adjust it as needed: ■ Leave this setting On to automatically optimize the computer image. Turn it off if you want to save adjustments you have made to the video settings.
■ Video Signal Leave this setting at Auto unless you are using a 60-Hz PAL system (then select PAL60). ■ Resize Choose an aspect ratio of either 4:3 or 16:9. Normal is the default setting for a computer connection. Customizing Projector Features You can use the Settings menu to lock the buttons on the projector, adjust audio volume, and customize several other features. ■ Keystone Squares up the shape of the image after the projector has been tilted upward.
■ Pointer Shape Lets you choose from three alternative pointer shapes. See page 34 for more information. ■ Brightness Control Lets you select from two levels of brightness. The Low setting reduces power consumption and noise, and extends the lamp’s operating life. ■ note You can also adjust the volume using the remote control. Volume Raises or lowers the volume of the projector’s speaker. ■ EasyMP Audio Out Lets you output sound from EasyMP scenarios (.
Enabling Password Protection To prevent unauthorized use, you can assign the projector a password. If you do, a screen will appear requesting the password whenever the projector is plugged in and turned on. If an incorrect password is entered three times in succession, the projector’s operation is locked and the power cord must be disconnected and reinserted to redisplay the password screen. If an incorrect password is entered thirty times in succession, the user must contact Epson to unlock the projector.
8. Press the Num button on the remote control to deactivate the numeric keypad. 9. If you want to disable the password temporarily, select Timer and press Enter. Then hold down the Num button while you use the numeric keypad to enter the number of hours (from 0 to 9999) that you want the password feature disabled. If you want the projector to request the password every time it is turned on, set the timer to 0H. The countdown for the elapsed time begins as soon as you close the Password Protect menu.
Hold down the Num button on the remote control and use the numeric keypad to enter the four digit password. The password screen closes, the numeric keypad is automatically deactivated, and projection begins. If the password is not correct, you see a message prompting you to re-enter the password. If you enter an incorrect password three times in succession, you see the message The projector’s operation will be locked. Request code xxxxx and the projector switches to standby mode for approximately 5 minutes.
2. Highlight User’s Logo and press Enter. 3. When you see a message asking Choose this image as the user’s logo?, select Yes and press Enter. A selection box displays over the image. 4. Use the pointer button to select the area of the image you want to use. Then press Enter. 5. When you see the message Select this Image?, highlight Yes and press Enter. 6. Use the arrow buttons to select a zoom rate (display size) and press Enter. 7.
2. Select Display and press Enter. 3. Highlight Display Background (for when there is no signal) or A/V Mute, and press Enter. 4. Select Logo and press Enter. 5. When you’re finished, press Esc to exit. Disabling the Projector’s Buttons note When you enable the Operation Lock function, you can lock all the projector’s buttons, or all buttons except the Power button. 1. Press the Menu button, highlight the Settings menu, and press Enter.
■ Display Use this setting to turn off the display of messages, change the background color, enable logo display, or turn off the startup screen display. ■ User’s Logo Create a custom startup screen, as described on page 119.
■ Multi-screen Enable this option if you are using the multi-screen feature to project from one source (one image) using multiple projectors (see page 81). Select Screen ID to define individual screen IDs. Choose Image Correction then choose an adjustment: Brightness Correct to adjust the brightness of each display, Color Correct to adjust the balance between red and green, or blue and yellow. ■ Language Select from nine languages to be used for the projector menus.
Fine-Tuning the Projector
1 Managing Projectors T he software included with your projector lets you monitor and control your projectors from a remote computer: ■ Use EMP Monitor (available for Windows only) to see your projectors’ status, switch image sources, and control basic settings. ■ Use the mail notification function to receive e-mail alerts about possible problems.
Using EMP Monitor note If you want to monitor projectors while they are in standby mode, select Standby Mode in the Extended menu, then select Network On. See page 122. EMP Monitor lets you use a remote computer to manage your projectors, whether connected wirelessly or over a wired network. It lets you easily turn the projectors on or off (together or individually), switch image sources, and check their status.
Registering a Projector Before you can monitor a projector, you have to register it. Follow these steps to automatically search for your projector(s). To manually register your projector(s) with EMP Monitor, refer to the on-screen Operation Guide. 1. Open EMP Monitor as described above. You see this screen: 2. Select Edit > New > Projector (automatic search).
note If the projector is not automatically found, your projector may not be connected or configured correctly for the network. See page 50. 3. Click Search to locate projectors currently operating on the network. Any projectors found on the network are listed as shown below: 4. Select the projector you want to add by clicking its name, then click the Edit button.
5. Enter a Display name, select a Parent group, if necessary, enter a Monitor Password, if necessary, and a Description for the projector. Then click the Register button. To register additional projectors with EMP Monitor, repeat steps 2 through 5. 6. When you’re done adding projectors, click Cancel. You see a screen with a list of all registered projectors: note To delete a projector from the list, right-click the projector name, and click Delete.
The following tables describe the status icons shown on the EMP Monitor screen. Group status icons No warnings or problems. All projectors in the group are operating normally. note Warning or problem. A projector in the group has a warning or problem. To create projector groups in EMP Monitor, refer to the on-screen Operation Guide. Monitoring disabled. Right click the icon and select Monitoring Enabled to begin monitoring the group. Data is currently being updated.
Power status icons The projector is powered on and its status is normal. The projector is powered off and its status is normal. The projector is powered on and its status is abnormal. The projector is powered off and its status is abnormal. Temperature level status icons The projector’s internal temperature is normal (low). The projector’s internal temperature is normal (medium). The projector’s internal temperature is normal (high). The projector’s internal temperature is high (high-temperature warning).
Error status icons (continued) Air flow sensor error. There is a problem with the projector’s air flow sensor; contact Epson as described on page 162. Lamp cover door open. Close the lamp cover door. Lamp out. The lamp has reached the end of its life. Lamp failure at power on. The lamp has reached its end of life or is installed incorrectly. High internal temperature error. The projector is turned off automatically. Internal (system) error. Contact Epson as described on page 162. Fan error.
Controlling Your Projectors The control buttons in the upper-right let you turn the projector on and off and select video sources. (Hold the mouse pointer over a button to see a description of its meaning.) Make sure you’ve selected the projector you want to operate (with the mouse pointer) before clicking one of the buttons.
Configuring the Monitoring Interval If you need to have the most current status information about your projectors, click the Refresh button in EMP Monitor. To select how often EMP Monitor checks the status of projectors, follow the steps below: 1. From the Tool menu, select Environment Setup. You see this screen. note If you want EMP Monitor to run whenever you start your computer, click Register at startup. 2. Enter the desired Update interval and click OK.
Using E-mail Alerts You can set up e-mail alerts to warn you of problems with the projector. Follow the steps below: 1. From the Tool menu, select Mail notification function. You see this screen: 2. Turn the Mail notification function setting On. 3. Enter the IP address and port number of your network’s SMTP (outgoing) mail server. 4. Enter the Sender (projector) mail address. 5. Enter up to three e-mail addresses to send alerts to in the Recipient mail address boxes. 6.
Understanding the Notification Messages note If a projector develops a critical problem, it may not be possible for it to report the error. If a projector experiences a problem, EMP Monitor sends an e-mail message to each of the addresses you entered in the Set mail notification function window. The subject line of the message includes the projector’s display name, shown in EMP Monitor, and the warning/error.
You see a login screen. 3. Do one of the following: ■ If you didn’t set a Web control password in the projector’s Network menu, click OK. ■ If you set a Web control password in the projector’s Network menu, enter it in the Password box, then click OK.
4. Select one of the menu options listed on the left, then change any of the settings as needed. These settings correspond to those found in the projector’s menu system. You cannot change the following settings using a web browser: ■ Pointer in the Settings menu ■ User’s Logo in the Extended menu ■ Reset All, Reset Air Filter Time, or Reset Lamp Hours in the Reset menu Use the controls at the bottom of the screen just as you would the corresponding remote control buttons.
1 Maintaining the Projector Y our projector needs little maintenance. All you have to do is keep the lens clean and periodically clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. warning Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp cover. Dangerous electrical voltages in the projector can injure you severely.
Cleaning the Lens Clean the lens whenever you notice dirt or dust on the surface. Use a canister of compressed air to remove dust. To remove dirt or smears on the lens, use lens-cleaning tissue. If necessary, moisten a soft cloth with lens cleaner and gently wipe the lens. Cleaning the Projector Case caution Do not use wax, alcohol, benzene, paint thinner, or other chemical detergents. These can damage the case. 140 Before you clean the case, turn off the projector and unplug the power cord.
Cleaning the Air Filter and Vent Clean the air filter and air intake vent after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector. note To order replacement air filters, request part number V13H13408. See page 13 for ordering information. Follow these steps: 1. Turn off the projector. Wait for the Power light to stop flashing, then unplug the power cord. 2.
Replacing the Lamp and Air Filter note When you get a replacement lamp for your projector, you should replace the filter. The life span of the projection lamp is about 2000 hours if Brightness Control in the Setting menu is set to High (default), and 3000 hours if Brightness Control is set to Low. To check how long the lamp has been in use, see page 151. It is time to replace the lamp when: Turn off this product when not in use to prolong the life of the projector.
4. Loosen the lamp cover screw (you don’t need to remove it). Then slide the lamp cover to the side and lift it off of the projector. 5. Loosen the two screws holding the lamp in place (you can’t remove them). Loosen, but don’t remove these screws note 6. Hold the lamp as shown and pull it straight out. The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 7. Gently insert the new lamp.
8. Push down the corner marked PUSH until it snaps in. 9. Once the lamp is fully inserted, tighten its screws. 10. Replace the lamp cover, then tighten its screw. 11. Turn the projector over. 12. Slide the air filter out and remove it. 13. Slide in the new air filter until it clicks in place. 14. Reset the lamp timer as described in the next section.
Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menus. 1. Press the Menu button on the remote control or on the projector’s control panel. You see the main menu. 2. Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight Reset, then press Enter. You see this screen: 3. Select Reset Lamp Hours and press Enter. 4. When you see the prompt, select Yes and press Enter. 5.
Transporting the Projector The projector contains many glass and precision parts. Follow these guidelines to prevent damage: note ■ When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials, placing plenty of cushioning around the projector. ■ When transporting the projector a long distance, first place it in a hard-shell shipping case, then pack it in a firm box with cushioning around the case.
1 Solving Problems This chapter helps you solve problems with your projector, and tells you how to contact technical support for problems you can’t solve yourself.
Using On-Screen Help If the image doesn’t look right or your audio isn’t working, you can get help by pressing the blue ? Help button on top of the projector or on the remote control. The following choices are available: ■ Problems with image ■ There is no sound ■ Select a different language Follow these steps to get help: 1. Press the blue ? Help button on the remote control or on the projector. You see the Help Menu. 2.
Checking Projector Status If your projector isn’t working correctly, first turn it off, wait for it to cool (the Power light stops flashing orange), and unplug it. Then plug the power cord back in and turn on the projector. If this doesn’t solve the problem, check the lights on top of the projector. What To Do When the Lights Flash The lights on top of the projector indicate the projector’s status.
Status lights (continued) Light Status Description Flashing red There is a problem with the fan or temperature sensor. Stop using the projector, disconnect the power cable, and contact Epson as described on page 162. Flashing orange Rapid cooling is in progress. Although this is not an abnormal condition, projection will stop automatically if the temperature rises higher. Make sure there is plenty of space around and under the projector for ventilation, and that the air filters and vents are clear.
Viewing Lamp Usage and Other Information Use the Info menu to view information about the display settings of your computer and the number of hours the lamp has been used. Press the Menu button and highlight the Info menu. You see the lamp usage hours and various input signal settings on the right. The life span of the lamp is about 2000 hours if the Brightness Control setting in the Setting menu is set to High (default), and 3000 hours if the Brightness Control setting is set to Low.
Solving Problems with the Image or Sound No image appears on the screen. ■ Check that the Power light is green, not flashing. ■ The projector may be in standby or sleep mode. If the Power light is orange, press the P Power button to turn the projector on. ■ If the power was switched off and then on again, the projector may be cooling down. Wait until the Power light stops flashing and remains orange; then press the P Power button again.
If you’re using a PC notebook: ■ Hold down the Fn key on the keyboard and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it. Check your notebook’s manual or online help for details. On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time.
■ Press the Resize button on the remote control. ■ Press the Esc button on the remote control to cancel the E-Zoom function. ■ Make sure your computer’s resolution setting is correct. Ideally, it should be 1024 × 768 to match the projector’s native resolution. If this option isn’t available, select one of the other compatible video formats listed on page 171. ■ ■ Windows: Right-click the desktop, select Properties, click the Settings tab, and select a different resolution.
■ The video signal may be split between the computer and the projector. If you notice a decline in the projected image quality when the image is displayed simultaneously on your notebook computer and the projector, turn off the notebook’s LCD display. ■ Make sure the correct input signal is selected in the Signal menu (see page 115). The image is blurry. ■ There may be dirt or smears on the lens. Clean the lens as described on page 140. ■ Adjust the focus using the focus ring (see page 23).
2. Adjust the Tracking to eliminate vertical bands. 3. Adjust the Sync setting to increase the image sharpness. The image is too light or dark, or colors are incorrect. note Because of the different technologies used, your projected image may not exactly match the colors on your notebook or computer monitor. ■ If you’re displaying a computer image, use the Color Mode option in the projector’s Image menu to adjust the color (see page 112).
■ Try adjusting the Volume setting in the Setting menu (see page 116). ■ If you’re using a VCR or other video source, make sure the volume is not turned all the way down or muted. Also, make sure the cables are connected correctly, as described on page 44. ■ If your presentation includes computer audio, make sure the volume control on your computer is not turned all the way down or muted.
■ Try restarting your computer. You can’t connect to the projector using NS Connection. 158 Solving Problems ■ Make sure the Epson 802.11g card is installed correctly in the projector; see page 48. If you have to reinstall the card, restart NS Connection or the program will not be able to detect the projector. ■ Restart your computer. ■ Make sure your projector and computer are configured correctly; see page 51 (Ad Hoc mode) or page 57 (Access Point mode).
■ If you have an access point or AirPort base station and you’re not using DHCP, check your projector’s IP address on the Access Point mode advanced settings screen. The first three segments of the IP address should be identical to the first three segments of the IP address of your access point or base station. The last segment of the projector’s IP address should be close, but not identical, to the last segment of the IP address of the access point or base station.
Solving EasyMP Problems An image displayed with EasyMP appears distorted. Because of their resolution, some JPEG images cannot be displayed correctly. Some JPEG files from digital cameras cannot be previewed. Files with a high compression ratio may appear blurry. In EMP SlideMaker 2, PowerPoint files don’t appear in the file window. EMP SlideMaker 2 does not support PowerPoint 95 or 97. Files created in these versions of PowerPoint must be opened and resaved in PowerPoint 2000 or later.
You can’t play your movies on the projector. ■ The projector only supports MPEG2 files. It does not support MPEG1 files. ■ Movie files included in a PowerPoint presentation can’t be played back in a scenario. EasyMP is unable to see the image files on your camera or external drive. Make sure your camera or drive shows up on your desktop as a drive letter when you connect it to your computer. If it does, it is probably a USB-mounted device and will work with your projector.
Where To Get Help Epson provides these technical support services: Internet Support Visit Epson’s support website at http://support.epson.com and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Visit http://www.presentersonline.com to access tips, templates, and training for developing successful presentations.
Purchase Supplies and Accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
Solving Problems
A Software Installation T note You can present over a wireless network from Mac OS X, but you can only monitor the projector from a remote location using a Windows system. he EasyMP software CD-ROM includes the software you need to use the projector’s EasyMP features—for presenting over a wireless network, transferring PowerPoint presentations to a memory card, and monitoring the projector from a remote location.
■ AirPort (802.11b) or AirPort Extreme (802.11g) wireless network interface to use EMP NS Connection wirelessly ■ Power Macintosh® series, iMac,® PowerBook,® or iBook® ■ At least 256MB of RAM ■ At least 128MB of free hard disk space ■ SVGA (800 × 600) or better display adapter and monitor (XGA or 1024 × 768 recommended) Installing the Software on a Windows System Follow these steps: 1. Insert the EasyMP CD-ROM in your computer’s CD-ROM or DVD drive. 2.
A Projector Installation T his appendix provides guidelines on installing the projector in a permanent location, such as a theater or conference room.
If you’re mounting the projector on the ceiling and you place it above screen level, you’ll have to tilt the projector down to position the image on the screen. This causes the image to lose its square shape. You can correct the distortion using the Keystone function in the projector’s menu system (see page 115). If you place the projector so that the base of the lens is level with the bottom of the screen, the image should be square and you won’t have to adjust it.
A Technical Specifications General Type of display Epson poly-silicon TFT active matrix Resolution (native format) 1024 × 768 pixels (XGA) Color reproduction 16.8 million colors Brightness 1705c 2200 lumens (High Brightness mode) 1700 lumens (Low Brightness mode) 1715c 2700 lumens (High Brightness mode) 2100 lumens (Low Brightness mode) Contrast ratio 400:1 Image size 30 to 300 inches Projection distance 3.2 to 39.7 feet (1.0 to 12.
Projection Lamp note Lamp life results will vary depending upon mode selected, environmental conditions, and usage. Turn off this product when not in use to prolong the life of the projector. Type UHE (Ultra High Efficiency) Power consumption 170 W Lamp life Approx. 2000 hours (High Brightness mode) Approx. 3000 hours (Low Brightness mode) Part number V13H010L38 Remote Control Range 20 feet (6 meters) Batteries (2) Alkaline AAA Dimensions Height 2.7 inches (68 mm), feet retracted Width 10.
Environmental Temperature Humidity (non-condensing) Operating: 41 to 95 °F (5 to 35 °C) Storage: 14 to 140 °F (–10 to 60 °C) Operating: 20 to 80% RH Storage: 10 to 90% RH Operating altitude 0 to 7,500 ft (0 to 2,286 m) Safety United States FCC 47CFR Part 15B Class B (DoC) UL60950 Third Edition Canada ICES-003 Class B CSA C22.2 No. 60950 CE Marking Directive 73/23/EEC Directive 89/336/EEC IEC 60950 Third Edition EN 55022, EN 55024 Pixelworks™ DNX™ ICs are used in this projector.
Technical Specifications Mode Refresh Rate (Hz) Resolution VGA—60 VESA—72 VESA—75 VESA—85 60 72 75 85 640 × 480* 640 × 480* 640 × 480* 640 × 480* SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 56 60 72 75 85 800 × 600* 800 × 600* 800 × 600* 800 × 600* 800 × 600* XGA—60 XGA—70 XGA—75 XGA—85 60 70 75 85 1024 × 768 1024 × 768 1024 × 768 1024 × 768 SXGA1—70 SXGA1—75 SXGA1—85 70 75 85 1152 × 864* 1152 × 864* 1152 × 864* SXGA2—60 SXGA2—75 SXGA2—85 SXGA+60 SXGA+75 SXGA+85 60 75 85 60 75 85 1280 × 9
Mode Refresh Rate (Hz) Resolution HDTV (720p) HDTV (720p) HDTV (1080i) HDTV (1080i) 60 50 60 50 — — — — TV480i TV480i SDTV (480p) SDTV (480p) 60 50 60 50 — — — — *The image is resized using Epson’s SizeWise™ Technology.
Technical Specifications
A Notices This appendix includes safety instructions and other important information about your Epson PowerLite projector. Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not place the projector on an unstable cart, stand, or table. ■ Do not use the projector near water or sources of heat. ■ Use the type of power source indicated on the projector. If you are not sure of the power available, consult your dealer or power company.
■ Except as specifically explained in this User’s Guide, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. ■ Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power cord or plug is damaged or frayed. If liquid has been spilled into the projector, or if it has been exposed to rain or water.
Remote Control Information You can operate the projector by remote control via a line-of-sight infrared (IR) receiver at the front and rear of the projector. The projector may not respond to remote control commands under the following conditions: ■ There is an object between the remote control IR emitter and the IR receiver on the projector. ■ Ambient light is too bright. ■ Certain types of fluorescent lighting are used. ■ A strong light source shines into the IR receiver.
Declaration of Conformity According to 47CFR, Part 2 and 15, Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers We: Located at: Epson America, Inc. 3840 Kilroy Airport Way MS: 3-13 Long Beach, CA 90806-2469 Telephone: (562) 290-5254 Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception.
Warranty Epson America, Inc. Limited Warranty Basic Two-Year Warranty and 90-Day Lamp Warranty What Is Covered: Epson America, Inc.
THE WARRANTY AND REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS STATED HEREIN, ANY STATEMENTS OR REPRESENTATIONS MADE BY ANY OTHER PERSON OR FIRM ARE VOID.
Notices
Index A C A/V Mute, 30, 120 to 121, 152 Access Point mode, 57 to 67 Access point, checking IP address of, 64 to 65 Accessories, 13 to 14 Ad Hoc mode, 51 to 56 Adapter, audio, 12, 44 Air filter cleaning, 141 ordering, 13 replacing, 142 to 144 AirPort, configuring for wireless, 55 to 56, 65 to 67 Altitude, 122, 171 Anti-theft device, 13, 17 Aspect ratio, 169 Audio adapter, 12, 44 connecting equipment, 44 to 45 controlling volume, 31 problems, troubleshooting, 156 to 157 turning off (using A/V Mute), 30 usin
D Data encryption, 79 to 80 Declaration of Conformity, 178 Default settings, restoring, 111 DHCP, 58, 62, 66, 159 Digital camera connecting to, 43 projecting images from, 93 to 94 Direct Power On, 26 Display order setting, 92 Distance from projector to screen, 16, 169 Documentation, 10 DPOF, 108 Drive, external, 94 to 95 DVD player, connecting, 38 to 42 E EAP authentication, 70 to 72 EAP-TLS certificate, 72 EasyMP problems, 160 to 161 software, 165 to 166 starting, 48, 84 Electrical specifications, 170 E-m
I Image adjusting, 22 to 25, 112 to 113 blurry, 155 capturing and saving in projector, 119 to 120 correcting shape, 23 to 24, 115, 154 fitting on screen, 114, 153 to 154 height, adjusting, 22 problems with, 152 to 156 projecting on chalkboard, 32 raising, 22 rotating, 91, 94, 107 selecting source, 19, 29, 39 to 42 size and projection distance, 16, 169 turning off (using A/V Mute), 30 zooming, 23, 31 Image menu, 112 to 113 Info menu, 151 Infrastructure mode, see Access Point mode Input signal, selecting, 19,
N Network managing projector remotely, 125 to 138 problems, 157 to 159 projecting, 73 to 75 security, 78 to 80 setting, 129 wired, 84 to 85 wireless, 47 to 84 Network card, 165 Network settings, configuring, 48 to 72 New Hardware Wizard, 19 No Signal message, 20, 152 to 153 Noise level, 169 Not Supported message, 153 NS Connection, see EMP NS Connection Numeric keypad, using, 117 O Operation Lock setting, 121 Optical aspect ratio, 169 Options for projector, 13 to 14 P Password protection, 117 to 119 remot
Projector carrying case, 13, 146 cleaning, 140 connections, see Connecting projector disabling buttons, 121 distance from screen, 16, 169 installing, 167 to 168 lamp specifications, 170 locking, 74 monitoring remotely, 125 to 138 options, 13 to 14 password protection, 117 to 119 positioning, 16 to 17 resolution, 169 specifications, 169 to 171 transporting, 146 troubleshooting, 147 to 150 turning off, 25 to 26 turning on, 17 to 19 unpacking, 12 viewing information about, 151 R Raising image, 22 Rear-screen
sit (presentation file type), 108 Sleep mode, 26 SlideMaker, see EMP SlideMaker Slides displaying on the fly, 90 to 93 Software installation, 165 to 166 Sound adding to scenarios, 98 troubleshooting, 156, 157 Source selecting, 19, 29 viewing, 151 Speaker, specifications, 169 Speakers, connecting, 45 Special effects, adding to slide transitions, 93, 102 Specifications brightness, 169 dimensions, 170 electrical, 170 environmental, 171 general, 169 lamp, 170 remote control, 170 resolution, 169 safety, 171 Spor
W Warning lights, 149 to 150 Warranty, 11, 180 to 181 WEP encryption, 68 to 69 Windows configuring for wireless, 53 to 55, 59 to 63 display problems, 153 EasyMP system requirements, 165 resolution setting, 154 Wired network, 84 to 85 Wireless connecting manually, 77 to 78 EAP, 70 to 72 EAP-TLS, 72 LEAP, 70 to 72 network card, 48, 84, 165 PEAP, 70 to 72 presentation, 47 to 83 problems, 158 to 159 security, 78 to 80 WEP encryption, 68 to 69 WPA security, 69 to 70 Wireless, mouse, 33, 37 to 38 WPA security, 69
Control panel USB light Zoom ring Focus ring Lamp cover A/V Mute slide lever Wireless module Remote control receiver Enlarge section of image A/V Mute slide Air exhaust vent Change slides in PowerPoint Foot adjust lever Front adjustable foot Enter (left mouse button) Esc (right mouse button) Activate on-screen pointer Switch between equipment connected to projector ports Optimize computer images Audio port Video port S-Video port Computer (Component Video) port Type B USB port Speaker Remote
Control panel USB light Zoom ring Focus ring Lamp cover A/V Mute slide lever Wireless module Remote control receiver Enlarge section of image A/V Mute slide Air exhaust vent Change slides in PowerPoint Foot adjust lever Front adjustable foot Enter (left mouse button) Esc (right mouse button) Activate on-screen pointer Switch between equipment connected to projector ports Optimize computer images Audio port Video port S-Video port Computer (Component Video) port Type B USB port Speaker Remote
