Operation Manual

Problems with the Projector
■ ■ ■ ■ ■
■
65
❑ The temperature indicator is red.
The projector is overheating, which turns the lamp off
automatically. Let the projector cool for a few minutes,
then turn it back on. Make sure nothing is blocking the
ventilation vents.
The air filter may be clogged. Clean it as described on
page 59 in Chapter 4 and then let the projector cool for a
while.
If the projector continues to overheat after you clean the air
filter, the problem may be caused by damage to the cooling
fan or internal circuits. Contact your dealer or nearest
address provided at “International Warranty Conditions” in
“Safety Instructions/World-Wide Warranty Terms”
included in the package.
♦ Warning: Do not attempt to service this product yourself except
as specifically explained in this User’s Guide.